HP rx7640四节点MC/ServiceGuard OPS方式配置过程（五）

3，   对配置文件进行检查：

[hsedb1:/]#cmcheckconf -v -C /etc/cmcluster/cmclconf.ascii

4，   将卷组vg_ops激活，并将配置信息分发到各个节点上去：

[hsedb1:/]#vgchange –a y vg_ops

[hsedb1:/]#cmapplyconf -v -C /etc/cmcluster/cmclconf.ascii

5，   将卷组vg_ops去激活：

[hsedb1:/]#vgchange a n vg_ops

6，启/停双机并设置卷组信息：

[hsedb1:/]#cmruncl

[hsedb1:/]#cmviewcl -v

CLUSTER        STATUS

cluster1       up    

  NODE           STATUS       STATE        

  hsedb1         up           running      

    Cluster_Lock_LVM:

    VOLUME_GROUP          PHYSICAL_VOLUME       STATUS              

    /dev/vg_ops           /dev/dsk/c6t0d4       up                  

    Network_Parameters:

    INTERFACE    STATUS           PATH                NAME         

    PRIMARY      up               1/0/1/1/0/6/0       lan0         

    PRIMARY      up               1/0/2/1/0           lan2         

  NODE           STATUS       STATE        

  hsedb2         up           running      

    Cluster_Lock_LVM:

    VOLUME_GROUP          PHYSICAL_VOLUME       STATUS              

    /dev/vg_ops           /dev/dsk/c6t0d4       up                  

    Network_Parameters:

    INTERFACE    STATUS           PATH                NAME         

    PRIMARY      up               1/0/1/1/0/6/0       lan0         

    PRIMARY      up               1/0/2/1/0           lan2         

  NODE           STATUS       STATE        

  hsedb3         up           running      

    Cluster_Lock_LVM:

    VOLUME_GROUP          PHYSICAL_VOLUME       STATUS              

    /dev/vg_ops           /dev/dsk/c6t0d3       up                  

    Network_Parameters:

    INTERFACE    STATUS           PATH                NAME         

    PRIMARY      up               1/0/1/1/0/6/0       lan0         

    PRIMARY      up               1/0/2/1/0           lan2         

  NODE           STATUS       STATE        

  hsedb4         up           running      

    Cluster_Lock_LVM:

    VOLUME_GROUP          PHYSICAL_VOLUME       STATUS              

    /dev/vg_ops           /dev/dsk/c6t0d3       up                  

    Network_Parameters:

    INTERFACE    STATUS           PATH                NAME         

    PRIMARY      up               1/0/1/1/0/6/0       lan0         

    PRIMARY      up               1/0/2/1/0           lan2         

[hsedb1:/]#vgchange -S y -c y vg_ops

[hsedb1:/]#vgchange –a s vg_ops

[hsedb1:/]#remsh hsedb2 /usr/sbin/vgchange –a s vg_ops

[hsedb1:/]#remsh hsedb3 /usr/sbin/vgchange –a s vg_ops

[hsedb1:/]#remsh hsedb4 /usr/sbin/vgchange –a s vg_ops

7，通过在每个节点上vgdisplay –v vg_ops进行查看，可见每个卷组vg_ops卷都为激活状态，且hsedb1为server端，其他三个节点为client端。

8，生成包配置文件：

[hsedb1:/]#mkdir /etc/cmcluster/pkg1

[hsedb1:/]#cmmakepkg –p /etc/cmcluster/pkg1/pkg1.conf