Chinaunix首页 | 论坛 | 博客
  • 博客访问: 5725751
  • 博文数量: 745
  • 博客积分: 10075
  • 博客等级: 上将
  • 技术积分: 7716
  • 用 户 组: 普通用户
  • 注册时间: 2005-04-29 12:09
文章分类

全部博文(745)

文章存档

2019年(1)

2016年(1)

2010年(31)

2009年(88)

2008年(129)

2007年(155)

2006年(197)

2005年(143)

分类:

2006-08-02 01:16:20

1,In order to be more proactive in the management of the TestKing network, an action plan was created. What step
should an administrator take while in the process of implementing an action plan?
D. Restore your network to a known previous state if the action item does not solve the problem
 
2,Which one of the following is the leading cause of lost network availability?
D. Network device outage at single points of failure in the topology
 
3,Which of the following components should you include in an End-System Topology Diagram?
A. device illustration
B. operating system
D. connection to the network
E. device name
 
4,Which of the following pieces of information are relevant to an end-system network configuration table?
B. dns server address
C. default gateway address
E. operating system and version
F. IP address and subnet mask
 
5,Which IOS command could you use to keep track of the exact time and date that a debug output occured at or the
duration of events?
B. service timestamps
R(config)# service timestamps log datatime localtime
R(config)# service timestamps debug datatime localtime
 
6,Which of the following protocol can you use with the trace(aka traceroute) command?
A. IP
B. AppleTalk
C. VINES
D. CLNS2
 
7,locate cable faults:TDR(time-domain reflectors)
  profile LAN traffic:Network Monitor
  examine DTE to DCE:BERT
  analyze network design:modeling software
  capture and decode packets:protocol analyser
  locate cross talk:cable tester
 
8,While performing your battery of routing network tests on the TestKing networks, you come across a remote router
that is NOT routing packets to the central router by way of its point-to-point link. To begin troubleshooting, you
enter the command "show ip interface brief"and to your surprise you see that the interface state is UP/UP. Taking
this information in consideration, which TCP/IP model layer should you begin your troubleshooting efforts?
A. application
B. internet
C. network interface
D. transport
E. network
 
9,Which layer of connectivity is tested with the ping command?
E. layer 1-3
 
10,For troubleshooting a connection-orientated protocol such as TCP, what things should you focus on?
C. verify sequence numbers
D. verify acknowledgment numbers
 
 
 
阅读(2267) | 评论(0) | 转发(0) |
0

上一篇:2006.8.1 3:00 签到

下一篇:2006.8.2 3:00 签到

给主人留下些什么吧!~~