Upon completion of this module, you should be able to:
1,use the sunsolve database for fault analysis purposes
2,differentiate between the sunsolve CD-ROM and sunsolve online databases
3,describe how to apply for a sunsolve online account
4,install the sunsolve software and patches software on a server and share them correctly to the network
5,configure and use sunsolve software from an installed server or from the CDROM
6,display the installed patches on a solaris system
7,display the current patch report for a given operating system
8,install and remove patches as needed on a solaris system
9,solve a workshop exercise using sunsolve database information
A sunsolve online account can be applied for by using a Web browser and visiting one of the following web sites:
The following procedure shows the steps needed to share the sunsolve software, and if needed, the CDROM from a server. the version number of sunsolve software under the /cdrom directory changes with progressive releases
1,insert the sunsolve CDROM into the CDROM drive on the server and verify that the vold daemon has mounted the software using the mount command
2,if needed, perform the installation procedure described previously, or run the software from the CDROM
3,share the software and, if needed, the mounted CDROM
# share -o ro sunsolve_install_dir
# share -o ro /cdrom/cdrom0
4,add the following line to the /etc/dfs/dfstab file:
# share -o ro sunsolve_install_dir
# share -o ro /cdrom/cdrom0
5,start the NFS server
# /etc/init.d/nfs.server start
6,check to see if the share command was successful
# dfsshares -F nfs server_name
7,on the clients, remotely mount the software or provide clients with the URL
# mount server_name:/cdrom/cdrom0 /cdrom
removing a patch
1,display a list of installed patches on your system
# showrev -p
2,find the installed location of the patch
# find / -name 102044-01 -print
3,change directory to the location of the patch
# cd /var/sadm/patch/102044-01
4,run the script to remove the patch and reboot the system
# ./backoutpatch
5,reboot the system
# reboot
阅读(2396) | 评论(0) | 转发(0) |
