memcache telnet 使用命令[实用]

memcached Telnet Interface

This is a short summary of everything important that helps to inspect a running  instance.

How To Connect

Use "ps -ef" to find out which IP and port was passed when memcached was started and use the same with telnet to connect to memcache. Example:

telnet 10.10.1.24 23456

 

Supported Commands

The supported commands (the official ones and some unofficial) are documented in the  document.

Sadly the syntax description isn't really clear and a simple help command listing the existing commands would be much better. Here is an overview of the commands you can find in the  (as of 16.12.2008):

 

Command	Description	Example
get	Reads a value	get mykey
set	Set a key unconditionally	set mykey 0 60 5
add	Add a new key	add newkey 0 60 5
replace	Overwrite existing key	replace key 0 60 5
append	Append data to existing key	append key 0 60 15
prepend	Prepend data to existing key	prepend key 0 60 15
incr	Increments numerical key value by given number	incr mykey 2
decr	Decrements numerical key value by given number	decr mykey 5
delete	Deletes an existing key	delete mykey
flush_all	Invalidate specific items immediately	flush_all
	Invalidate all items in n seconds	flush_all 900
stats	Prints general statistics	stats
	Prints memory statistics	stats slabs
	Prints memory statistics	stats malloc
	Print higher level allocation statistics	stats items
		stats detail
		stats sizes
	Resets statistics	stats reset
version	Prints server version.	version
verbosity	Increases log level	verbosity
quit	Terminate telnet session	quit

Traffic Statistics

You can query the current traffic statistics using the command

stats

You will get a listing which serves the number of connections, bytes in/out and much more.

 

Example Output:

STAT pid 14868
STAT uptime 175931
STAT time 1220540125
STAT version 1.2.2
STAT pointer_size 32
STAT rusage_user 620.299700
STAT rusage_system 1545.703017
STAT curr_items 228
STAT total_items 779
STAT bytes 15525
STAT curr_connections 92
STAT total_connections 1740
STAT connection_structures 165
STAT cmd_get 7411
STAT cmd_set 28445156
STAT get_hits 5183
STAT get_misses 2228
STAT evictions 0
STAT bytes_read 2112768087
STAT bytes_written 1000038245
STAT limit_maxbytes 52428800
STAT threads 1
END

 

Memory Statistics

You can query the current memory statistics using

stats slabs

 

Example Output:

STAT 1:chunk_size 80
STAT 1:chunks_per_page 13107
STAT 1:total_pages 1
STAT 1:total_chunks 13107
STAT 1:used_chunks 13106
STAT 1:free_chunks 1
STAT 1:free_chunks_end 12886
STAT 2:chunk_size 100
STAT 2:chunks_per_page 10485
STAT 2:total_pages 1
STAT 2:total_chunks 10485
STAT 2:used_chunks 10484
STAT 2:free_chunks 1
STAT 2:free_chunks_end 10477
[...]
STAT active_slabs 3
STAT total_malloced 3145436
END

 

Which Keys Are Used?

There seems to be no builtin function to determine the currently set keys. However you can use the

stats items

command to determine how many keys do exist.

stats items
STAT items:1:number 220
STAT items:1:age 83095
STAT items:2:number 7
STAT items:2:age 1405
[...]
END

This at least helps to see if any keys are used. To dump the key names from a PHP script that already does the memcache access you can use the PHP code from.

 

Never Set a Timeout > 30 Days!

While this has nothing to do with the telnet access this is a problem you might run into. If you try to "set" or "add" a key with a timeout bigger than the allowed maximum you might not get what you expect because memcached then treats the value as a Unix timestamp. Also if the timestamp is in the past it will do nothing at all. Your command will silently fail.

So if you want to use the maximum lifetime specify 2592000. Example:

set my_key 0 2592000 1
1

Disappearing Keys on Overflow

Despite the documentation saying something about wrapping around 64bit overflowing a value using "incr" causes the value to disappear. It needs to be created using "add"/"set" again.

 

 

 

 

memcached telnet相关操作

 

elnet localhost 11211
//保存
set good 32 0 10
helloworld
STORED

//取回
gets good
VALUE good 32 10 10
helloworld
END

//替换
replace good 32 0 10
worldhello
STORED
get good
VALUE good 32 10
worldhello
END

//尾部添加
append good 32 0 5
after
STORED
get good
VALUE good 32 15
worldhelloafter
END

//头部添加
prepend good 32 0 6
before
STORED
get good
VALUE good 32 21
beforeworldhelloafter
END

//删除
delete good
DELETED
get good
END

delete good
NOT_FOUND

cas good 32 0 10 hel
helloworld
EXISTS

gets good
VALUE good 32 10 10
helloworld
END

cas bad 32 0 10 good
worldhello
NOT_FOUND

//统计
stats items
STAT items:1:number 1
STAT items:1:age 24
STAT items:1:evicted 0
STAT items:1:outofmemory 0
END

stats sizes
96 1
END

stats slabs
STAT 1:chunk_size 88
STAT 1:chunks_per_page 11915
STAT 1:total_pages 1
STAT 1:total_chunks 11915
STAT 1:used_chunks 11914
STAT 1:free_chunks 1
STAT 1:free_chunks_end 11913
STAT 2:chunk_size 112
STAT 2:chunks_per_page 9362
STAT 2:total_pages 1
STAT 2:total_chunks 9362
STAT 2:used_chunks 9361
STAT 2:free_chunks 1
STAT 2:free_chunks_end 9361
STAT 5:chunk_size 232
STAT 5:chunks_per_page 4519
STAT 5:total_pages 1
STAT 5:total_chunks 4519
STAT 5:used_chunks 4518
STAT 5:free_chunks 1
STAT 5:free_chunks_end 4518
STAT active_slabs 3
STAT total_malloced 3145472
END

stats items
STAT items:1:number 1
STAT items:1:age 1768
STAT items:1:evicted 0
STAT items:1:outofmemory 0
END

stats
STAT pid 18261
STAT uptime 528593
STAT time 1237277383
STAT version 1.2.6
STAT pointer_size 32
STAT rusage_user 0.004999
STAT rusage_system 0.015997
STAT curr_items 1
STAT total_items 2
STAT bytes 66
STAT curr_connections 2
STAT total_connections 13
STAT connection_structures 3
STAT cmd_get 11
STAT cmd_set 8
STAT get_hits 2
STAT get_misses 9
STAT evictions 0
STAT bytes_read 1342
STAT bytes_written 8752
STAT limit_maxbytes 134217728
STAT threads 1
END

使用usr/bin/perl /root/memcached-1.2.6/scripts/memcached-tool localhost:11211
output
# Item_Size   Max_age 1MB_pages Count   Full?
1      88 B     1531 s       1       1      no
2     112 B        0 s       1       0      no
5     232 B        0 s       1       0      no

# slab class编号 
Item_Size Chunk大小 
Max_age LRU内最旧的记录的生存时间 
1MB_pages 分配给Slab的页数 
Count Slab内的记录数 
Full? Slab内是否含有空闲chunk