Linux mrtg configure how to

来源于MRTG相关网站 

Step # 1 : Make sure snmp server installed

Please note that snmpd configuration does not require using mrtg with remote network devices such as Routers and switches. If you just want mrtg graphs for router or switch then please refer to (as all these devices comes preconfigured with snmpd software).

Run rpm commands query option to find out snmp server installed or not:

# rpm -qa | grep snmp

If snmp installed then please refer ; otherwise snmp server and utils were not present and your need to install them using following steps (login as a root user):

(a) Visit to get snmp server and utilities rpms. If you are fedora user then use yum command as follows to install it:

# yum install net-snmp-utils net-snmp

(b) If you are RHEL subscriber then use up2date command as follows to install:

#up2date -v -i net-snmp-utils net-snmp

 

 

Step # 2 : Determine if snmp server is running or not

Run 'ps' command to see if snmp server is running or not:

# ps -aux | grep snmp

Output:

root   5512  0.0  2.3  5872 3012 pts/0    S    22:04   0:00 /usr/sbin/snmpd

Alternatively, you can try any of the following two commands as well:

# lsof -i :199

Output:

COMMAND  PID USER   FD   TYPE DEVICE SIZE NODE NAME

snmpd   5512 root    4u  IPv4  34432       TCP *:smux (LISTEN)

OR try out netstat command:

# netstat -natv | grep ':199'

Output:

tcp        0      0 0.0.0.0:199             0.0.0.0:*               LISTEN

If you found service is running or listing on port 199 then please see ; otherwise start service using following command:

# service snmpd start

Make sure snmpd service starts automatically, when linux comes us (add snmpd service):

# chkconfig --add snmpd

 

Step # 3 : Make sure snmp server configured properly

Run snmpwalk utility to request for tree of information about network entity. In simple words query snmp server for your IP address (assigned to eth0, eth1, lo etc):

# snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.127.0.0.1 = 1

ip.ipAddrTable.ipAddrEntry.ipAdEntIfIndex.192.168.0.3 = 2

If you can see your IP address then please proceed to ; else it is a time to configure snmp server as follows (by default RHEL and RH 8/9 are not configured for snmp server for security reason):

Configure SNMP

(1) Edit file /etc/snmp/snmpd.conf using text editor:

# vi /etc/snmp/snmpd.conf

Change/Modify line(s) as follows:

Find following Line:

com2sec notConfigUser  default       public

Replace with (make sure you replace 192.168.0.0/24 replace with your network IPs) following lines:

com2sec local     localhost           public

com2sec mynetwork 192.168.0.0/24      public

Scroll down bit and change:

Find Lines:

group   notConfigGroup v1           notConfigUser

group   notConfigGroup v2c           notConfigUser

Replace with:

group MyRWGroup v1         local

group MyRWGroup v2c        local

group MyRWGroup usm        local

group MyROGroup v1         mynetwork

group MyROGroup v2c        mynetwork

group MyROGroup usm        mynetwork

Again scroll down bit and locate following line:

Find line:

view    systemview     included      system

Replace with:

view all    included  .1                               80

Again scroll down bit and change:

Find line:

access  notConfigGroup ""      any       noauth    exact  systemview none none

Replace with:

access MyROGroup ""      any       noauth    exact  all    none   none
access MyRWGroup ""      any       noauth    exact  all    all    none

Scroll down bit and change:

Find lines:

syslocation Unknown (edit /etc/snmp/snmpd.conf)

syscontact Root  (configure /etc/snmp/snmp.local.conf)

Replace with (make sure you supply appropriate values):

syslocation Linux (RH3_UP2), Home Linux Router.
syscontact Vivek G Gite

For your convenient, here is my file. Feel free to use this file. Make sure you make backup of your existing file if you use this file as it is.

Start your snmp server and test it:

(a) Make sure when linux comes up snmpd always starts:

 # chkconfig snmpd on

(b) Make sure service start whenever Linux comes up (after reboot):

 # service snmpd start

(c) Finally test your snmp server:

 # snmpwalk -v 1 -c public localhost IP-MIB::ipAdEntIfIndex

 

Step # 4 : Install mrtg if not installed

Mrtg software may install during initial installation; you can verify if MRTG installed or not with following RPM command:

rpm -qa | grep mrtg

If mrtg already installed please see ; else use to find MRTG rpm or up2date command to install MRTG software:

# up2date -v -i mrtg

Fedora Linux user can use yum command as follows to install MRTG:

# yum install mrtg

 

Step # 5 : Commands to Configure mrtg

(a) Create document root to store mrtg graphs/html pages:

# mkdir -p /var/www/html/mymrtg/

(b) Run any one of the following cfgmaker command to create mrtg configuration file:

#cfgmaker --global 'WorkDir: /var/www/html/mymrtg' --output /etc/mrtg/mymrtg.cfg public@localhost

OR (make sure your FQDN resolves, in following example i'm using rh9.test.com which is my router FQDN address)

# cfgmaker --global 'WorkDir: /var/www/html/mymrtg' --output /etc/mrtg/mymrtg1.cfg [e-mail]

(c) Create default index page for your MRTG configuration:

# indexmaker --output=/var/www/html/mymrtg/index.html /etc/mrtg/mymrtg.cfg

(d) Copy all tiny png files to your mrtg path:

# cp -av /var/www/html/mrtg/*.png /var/www/html/mymrtg/

 

Step # 6 First test run of mrtg

(a) Run mrtg command from command line with your configuration file:

# mrtg /etc/mrtg/mymrtg.cfg

Note: You may get few warning message for first time; ignore them.

(b) Fire your favorite web browser (like FireFox :D ) and type url or

Step # 7 Create crontab entry so that mrtg graph / images get generated every 5 minutes

(a) Login as a root user or login as a mrtg user and type following command:

# crontab -e

(b) Add mrtg cron job entry to configuration file (append following line to it):

*/5 * * * * /usr/bin/mrtg /etc/mrtg/mymrtg.cfg --logging /var/log/mrtg.log

 

Step # 8 Block ports 161 & 162 at firewall

You do not want to give access to everyone to your snmp server for security reasons. SNMP server uses UDP 161, 162 ports for communication. Use Linux IPTABLES firewall to restrict access to SNMP server

(a) Allow outgoing SNMP server request from your Linux computer. This is useful when you query remote host/router (replace SERVER IO with your real IP):

SERVER="xxx.xxx.xxx.xxx"

iptables -A OUTPUT -p udp -s $SERVER --sport 1024:65535 -d 0/0 --dport 161:162 -m state --state NEW,ESTABLISHED -j ACCEPT

iptables -A INPUT -p udp -s 0/0 --sport 161:162 -d $SERVER --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT

(b )Allow incoming SNMP client request via iptables. This is useful when you wish to accept queries for rest of the world (replace SERVER IP with your real IP):

SERVER="xxx.xxx.xxx.xxx"

iptables -A INPUT -p udp -s 0/0 --sport 1024:65535 -d $SERVER --dport 161:162 -m state --state NEW,ESTABLISHED -j ACCEPT

iptables -A OUTPUT -p udp -s $SERVER --sport 161:162 -d 0/0 --dport 1024:65535 -m state --state ESTABLISHED -j ACCEPT

Pleae note that above two are just SNMP specific iptables rules. Please consult iptables(8) man page for complete information on iptables

Step # 9 Optional: Protect your MRTG graphs/html pages with password protected directory

Once again, you would like to restrict access to your MRTG reports. This can easily accomplished with Apache webserver's .htaccess file. If you are on webhosting server with control panel (such as ensim or plesk) then you can use control panel itself to create password-protected directory.

Below is process outlined to protect graphs using apache's .htaccess file and htpasswd command:

Step # 1: Create .htaccess file in /var/www/html/mymrtg/ directory (add text as follows):

vi /var/www/html/mymrtg/.htaccess

Add following text to file:

AuthName "MRTG Graphs/Html restricted access"

AuthType Basic

AuthUserFile /var/members/.htpasswd

require user mrtgadmin

Step # 2: Create a user and password name (-c assumes first time you are using .htpasswd file):

# htpasswd -c /var/members/.htpasswd mrtgadmin

For more information please see mini-howto.

 

MRTG: References and further reading

Use following resources to find out more Linux help, links to general information and help for MRTG, snmp under Linux/UNIX/Windows OSes:

• MRTG home page:
• SNMP home page:
• MRTG authors installation by compiling source code:
• SNMP How-to:
• Linux (UNIX) Man pages : snmpd.conf(5), snmpwalk(1), cfgmaker(1), indexmaker(1), mrtg(1), rpm(8), crontab(1)
• Other MRTG tutorial:
• Special Case: MRTG Red hat enterprise Linux Virtuozzo VPS configuration
• See