SUN SPARK-T3设置ILOM SP网卡地址的方法

当SPARC T3-1刚插上电源线的时候，OK灯会处于快闪状态（1秒3次），表示SP Booting，此时如果连接了串口（9600默认设置即可），可以看到整个SP boot的过程。
最后会出现如下的提示，输入root changeme即可登录ILOM（Integrated Lights Out Manager） SP，OK灯会处于闪烁状态（3秒1次）：

ORACLESP-1121BDRE86 login: root

Password:changeme



Oracle(R) Integrated Lights Out Manager



Version 3.0.12.6.c r63875



Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.



Warning: password is set to factory default.



->cd /SP/network

/SP/network



-> show /SP/network



/SP/network

Targets:

interconnect

ipv6

test



Properties:

commitpending = (Cannot show property)

dhcp_server_ip = none

ipaddress = 0.0.0.0

ipdiscovery = dhcp

ipgateway = 0.0.0.0

ipnetmask = 0.0.0.0

macaddress = 00:21:28:C1:E9:1D

managementport = /SYS/MB/SP/NETMGMT

outofbandmacaddress = 00:21:28:C1:E9:1D

pendingipaddress = 0.0.0.0

pendingipdiscovery = dhcp

pendingipgateway = 0.0.0.0

pendingipnetmask = 0.0.0.0

pendingmanagementport = /SYS/MB/SP/NETMGMT

sidebandmacaddress = 00:21:28:C1:E9:1C

state = enabled



Commands:

cd

set

show



-> set state=enabled

Set 'state' to 'enabled'



-> set pendingipaddress=192.168.1.10

Set 'pendingipaddress' to '192.168.1.10'



-> set pendingipdiscovery=static

Set 'pendingipdiscovery' to 'static'



-> set pendingipnetmask=255.255.255.0

Set 'pendingipnetmask' to '255.255.255.0'



-> set pendingipgateway=192.168.1.254

Set 'pendingipgateway' to '192.168.1.254'



-> set commitpending=true

Set 'commitpending' to 'true'



-> show /SP/network



/SP/network

Targets:

interconnect

ipv6

test



Properties:

commitpending = (Cannot show property)

dhcp_server_ip = none

ipaddress = 192.168.1.10

ipdiscovery = static

ipgateway = 192.168.1.254

ipnetmask = 255.255.255.0

macaddress = 00:21:28:C1:E9:1D

managementport = /SYS/MB/SP/NETMGMT

outofbandmacaddress = 00:21:28:C1:E9:1D

pendingipaddress = 192.168.1.10

pendingipdiscovery = static

pendingipgateway = 192.168.1.254

pendingipnetmask = 255.255.255.0

pendingmanagementport = /SYS/MB/SP/NETMGMT

sidebandmacaddress = 00:21:28:C1:E9:1C

state = enabled



Commands:

cd

set

show



-> exit

 

完成以上配置后，就能够通过Web登录到ILOM SP：  ；

也可以通过SSH登录ssh -l root 192.168.1.10。

可以告别串口啦！