Windows 驱动开发 - 4

上篇《Windows 驱动开发 - 3》我们使用了PnP，现在还差WMI。

    WMI：Windows Management Interface

    WMI 提供预装的类架构，允许使用脚本语言(VBS)、C#、VB .NET 或 C++ 编写的脚本或应用程序监视和配置计算机中的应用程序、系统或网络组件以及硬件。

一、WMI

    虽然WDF帮你完成很多工作，但是你还必须自己触发事件和实例化回调函数。

    在WDM中使用 wmilib.sys 静态注册很容易，但难以动态注册。

    但是在WDF中这些很容易实现。

    1. IRP_MJ_SYSTEM_CONTROL

        WDF完全掌控IRP_MJ_SYSTEM_CONTROL。

        IRP_MJ_SYSTEM_CONTROL：系统内部产生的控制信息，类似于内核调用函数

        注意：使用DeviceControl系统最低要求为xp。

BOOL WINAPI DeviceIoControl(
  _In_        HANDLE       hDevice,
  _In_        DWORD        dwIoControlCode,
  _In_opt_    LPVOID       lpInBuffer,
  _In_        DWORD        nInBufferSize,
  _Out_opt_   LPVOID       lpOutBuffer,
  _In_        DWORD        nOutBufferSize,
  _Out_opt_   LPDWORD      lpBytesReturned,
  _Inout_opt_ LPOVERLAPPED lpOverlapped
);

2. 模式

     (1) 实例化已用设备

     (2) 当需要的时候触发事件

     (3) 统计报告

     (4) 更新状态

     (5) 注销后删除设备 （正常或意外删除)

    3. ETW / 跟踪

        支持内核模式 ETW / 跟踪

二、WDF和WMI

     wdf使用为WMI提供接口。

NTSTATUS WdfDeviceCreateDeviceInterface(
  [in] WDFDEVICE        Device,
  [in] const GUID *InterfaceClassGUID,
  [in, optional] PCUNICODE_STRING ReferenceString
);

    其中GUID，请参见“”

    GUID声明(需要使用头文件initguid.h)：

DEFINE_GUID(GUID_DEVINTERFACE_OSRUSBFX2, // Generated using guidgen.exe
   0x573e8c73, 0xcb4, 0x4471, 0xa1, 0xbf, 0xfa, 0xb2, 0x6c, 0x31, 0xd3, 0x84);
// {573E8C73-0CB4-4471-A1BF-FAB26C31D384}

源代码step2.c

/*++

Step2: This steps shows:
       1) How to create a context with the WDFDEVICE object
       2) How to initialize the USB device.
       3) How to register an interface so that app can open
          an handle to the device.
--*/

#include "ntddk.h"
#include "wdf.h"
#include "prototypes.h"
#pragma warning(disable:4200) // suppress nameless struct/union warning
#pragma warning(disable:4201) // suppress nameless struct/union warning
#pragma warning(disable:4214) // suppress bit field types other than int warning
#include "usbdi.h"
#pragma warning(default:4200)
#pragma warning(default:4201)
#pragma warning(default:4214)
#include "wdfusb.h"
#include "initguid.h"

DEFINE_GUID(GUID_DEVINTERFACE_OSRUSBFX2, // Generated using guidgen.exe
   0x573e8c73, 0xcb4, 0x4471, 0xa1, 0xbf, 0xfa, 0xb2, 0x6c, 0x31, 0xd3, 0x84);
// {573E8C73-0CB4-4471-A1BF-FAB26C31D384}

typedef struct _DEVICE_CONTEXT {
  WDFUSBDEVICE      UsbDevice;
  WDFUSBINTERFACE   UsbInterface;
} DEVICE_CONTEXT, *PDEVICE_CONTEXT;

WDF_DECLARE_CONTEXT_TYPE_WITH_NAME(DEVICE_CONTEXT, GetDeviceContext)


NTSTATUS
DriverEntry(
    IN PDRIVER_OBJECT  DriverObject,
    IN PUNICODE_STRING RegistryPath
    )
{
    WDF_DRIVER_CONFIG       config;
    NTSTATUS                status;

    KdPrint(("DriverEntry of Step2\n"));

    WDF_DRIVER_CONFIG_INIT(&config, EvtDeviceAdd);

    status = WdfDriverCreate(DriverObject,
                        RegistryPath,
                        WDF_NO_OBJECT_ATTRIBUTES,
                        &config,
                        WDF_NO_HANDLE
                        );

    if (!NT_SUCCESS(status)) {
        KdPrint(("WdfDriverCreate failed 0x%x\n", status));
    }

    return status;
}

NTSTATUS
EvtDeviceAdd(
    IN WDFDRIVER        Driver,
    IN PWDFDEVICE_INIT  DeviceInit
    )
{
    WDF_OBJECT_ATTRIBUTES               attributes;
    NTSTATUS                            status;
    WDFDEVICE                           device;
    PDEVICE_CONTEXT                     pDevContext;
    WDF_PNPPOWER_EVENT_CALLBACKS        pnpPowerCallbacks;

    UNREFERENCED_PARAMETER(Driver);

    WDF_PNPPOWER_EVENT_CALLBACKS_INIT(&pnpPowerCallbacks);
    pnpPowerCallbacks.EvtDevicePrepareHardware = EvtDevicePrepareHardware;
    WdfDeviceInitSetPnpPowerEventCallbacks(DeviceInit, &pnpPowerCallbacks);

    WDF_OBJECT_ATTRIBUTES_INIT_CONTEXT_TYPE(&attributes, DEVICE_CONTEXT);

    status = WdfDeviceCreate(&DeviceInit, &attributes, &device);
    if (!NT_SUCCESS(status)) {
        KdPrint(("WdfDeviceCreate failed 0x%x\n", status));
        return status;
    }

    pDevContext = GetDeviceContext(device);

    status = WdfDeviceCreateDeviceInterface(device,
                                (LPGUID) &GUID_DEVINTERFACE_OSRUSBFX2,
                                NULL);// Reference String
    if (!NT_SUCCESS(status)) {
        KdPrint(("WdfDeviceCreateDeviceInterface failed 0x%x\n", status));
        return status;
    }

    return status;
}


NTSTATUS
EvtDevicePrepareHardware(
    IN WDFDEVICE    Device,
    IN WDFCMRESLIST ResourceList,
    IN WDFCMRESLIST ResourceListTranslated
    )
{
    NTSTATUS                            status;
    PDEVICE_CONTEXT                     pDeviceContext;
    WDF_USB_DEVICE_SELECT_CONFIG_PARAMS configParams;

    UNREFERENCED_PARAMETER(ResourceList);
    UNREFERENCED_PARAMETER(ResourceListTranslated);

    pDeviceContext = GetDeviceContext(Device);

    //
    // Create the USB device if it is not already created.
    //
    if (pDeviceContext->UsbDevice == NULL) {
        status = WdfUsbTargetDeviceCreate(Device,
                                    WDF_NO_OBJECT_ATTRIBUTES,
                                    &pDeviceContext->UsbDevice);
        if (!NT_SUCCESS(status)) {
            KdPrint(("WdfUsbTargetDeviceCreate failed 0x%x\n", status));
            return status;
        }
    }

    WDF_USB_DEVICE_SELECT_CONFIG_PARAMS_INIT_SINGLE_INTERFACE(&configParams);

    status = WdfUsbTargetDeviceSelectConfig(pDeviceContext->UsbDevice,
                                        WDF_NO_OBJECT_ATTRIBUTES,
                                        &configParams);
    if(!NT_SUCCESS(status)) {
        KdPrint(("WdfUsbTargetDeviceSelectConfig failed 0x%x\n", status));
        return status;
    }

    pDeviceContext->UsbInterface =
                configParams.Types.SingleInterface.ConfiguredUsbInterface;

    return status;
}