Linux系统自定义网卡并更改网卡接口

本文档详细介绍给RHEL7添加一张自定义网卡并更改网卡接口的方法

环境

VMware Workstation Pro
Red Hat Enterprise  Server release 7.3

查看当前网卡信息

[root@Jaking ~]# cat /etc/redhat-release 
Red Hat Enterprise Linux Server release 7.3 (Maipo)
[root@Jaking ~]# ifconfig
ens33: flags=4163  mtu 1500
        inet 192.168.10.11  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::250:56ff:fe2b:88bf  prefixlen 64  scopeid 0x20
        ether 00:50:56:2b:88:bf  txqueuelen 1000  (Ethernet)
        RX packets 454  bytes 44638 (43.5 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 339  bytes 33150 (32.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 1  (Local Loopback)
        RX packets 112  bytes 9492 (9.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 112  bytes 9492 (9.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

添加网卡

取消红框内的钩

查看网卡信息

[root@Jaking ~]# ifconfig
ens33: flags=4163  mtu 1500
        inet 192.168.10.11  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::250:56ff:fe2b:88bf  prefixlen 64  scopeid 0x20
        ether 00:50:56:2b:88:bf  txqueuelen 1000  (Ethernet)
        RX packets 488  bytes 47935 (46.8 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 356  bytes 35698 (34.8 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens38: flags=4163  mtu 1500
        ether 00:0c:29:46:f9:b8  txqueuelen 1000  (Ethernet)
        RX packets 5  bytes 594 (594.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 1  (Local Loopback)
        RX packets 112  bytes 9492 (9.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 112  bytes 9492 (9.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

配置网卡并更改网卡接口

[root@Jaking ~]# cd /etc/sysconfig/network-scripts/
[root@Jaking network-scripts]# ls
ifcfg-ens33  ifdown-ipv6    ifdown-TeamPort  ifup-ippp   ifup-routes       network-functions
ifcfg-lo     ifdown-isdn    ifdown-tunnel    ifup-ipv6   ifup-sit          network-functions-ipv6
ifdown       ifdown-post    ifup             ifup-isdn   ifup-Team
ifdown-bnep  ifdown-ppp     ifup-aliases     ifup-plip   ifup-TeamPort
ifdown-eth   ifdown-routes  ifup-bnep        ifup-plusb  ifup-tunnel
ifdown-ib    ifdown-sit     ifup-eth         ifup-post   ifup-wireless
ifdown-ippp  ifdown-Team    ifup-ib          ifup-ppp    init.ipv6-global

添加网卡后，需要创建对应的网卡配置文件

[root@Jaking network-scripts]# cp ifcfg-ens33 ifcfg-ens34 
[root@Jaking network-scripts]# vim ifcfg-ens34          
TYPE=Ethernet
BOOTPROTO=static
DEFROUTE=yes
PEERDNS=yes
PEERROUTES=yes
IPV4_FAILURE_FATAL=no
NAME=ens34
DEVICE=ens34
ONBOOT=yes
IPADDR=172.16.100.100
NETMASK=255.255.255.0          

禁用ens38接口

[root@Jaking network-scripts]# ip link set ens38 down  
[root@Jaking network-scripts]# ifconfig
ens33: flags=4163  mtu 1500
        inet 192.168.10.11  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::250:56ff:fe2b:88bf  prefixlen 64  scopeid 0x20
        ether 00:50:56:2b:88:bf  txqueuelen 1000  (Ethernet)
        RX packets 812  bytes 74791 (73.0 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 537  bytes 61780 (60.3 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 1  (Local Loopback)
        RX packets 112  bytes 9492 (9.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 112  bytes 9492 (9.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

重命名ens38接口为ens34

[root@Jaking network-scripts]# ip link set ens38 name ens34  

启用修改完成的ens34接口

[root@Jaking network-scripts]# ip link set ens34 up        
              
[root@Jaking network-scripts]# systemctl restart network
[root@Jaking network-scripts]# ifconfig                 
ens33: flags=4163  mtu 1500
        inet 192.168.10.11  netmask 255.255.255.0  broadcast 192.168.10.255
        inet6 fe80::250:56ff:fe2b:88bf  prefixlen 64  scopeid 0x20
        ether 00:50:56:2b:88:bf  txqueuelen 1000  (Ethernet)
        RX packets 1389  bytes 123239 (120.3 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 913  bytes 117924 (115.1 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

ens34: flags=4163  mtu 1500
        inet 172.16.100.100  netmask 255.255.255.0  broadcast 192.168.100.255
        ether 00:0c:29:46:f9:b8  txqueuelen 1000  (Ethernet)
        RX packets 5  bytes 594 (594.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 2  bytes 120 (120.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10
        loop  txqueuelen 1  (Local Loopback)
        RX packets 148  bytes 12552 (12.2 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 148  bytes 12552 (12.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

总结

以上就是给RHEL7添加一张自定义网卡并更改网卡接口的方法，希望能帮助到大家！