Chinaunix首页 | 论坛 | 博客
  • 博客访问: 1704309
  • 博文数量: 143
  • 博客积分: 0
  • 博客等级: 民兵
  • 技术积分: 1462
  • 用 户 组: 普通用户
  • 注册时间: 2016-08-23 11:14
文章分类

全部博文(143)

文章存档

2022年(3)

2021年(13)

2020年(21)

2019年(8)

2018年(28)

2017年(7)

2016年(63)

我的朋友

分类:

2016-10-27 18:58:32

/etc/profile、~/.bash_profile等几个文件的执行过程

关于登录linux时,/etc/profile、~/.bash_profile等几个文件的执行过程。

在登录Linux时要执行文件的过程如下:
在 刚登录Linux时,首先启动 /etc/profile 文件,然后再启动用户目录下的 ~/.bash_profile、 ~/.bash_login或 ~/.profile文件中的其中一个,执行的顺序为:~/.bash_profile、 ~/.bash_login、 ~/.profile。如果 ~/.bash_profile文件存在的话,一般还会执行 ~/.bashrc文件。因为在 ~/.bash_profile文件中一般会有下面的代码:

if [ -f ~/.bashrc ] ; then
 . ./bashrc
           fi
  ~/.bashrc中,一般还会有以下代码:
if [ -f /etc/bashrc ] ; then
 . /etc/bashrc
fi

所以,~/.bashrc会调用 /etc/bashrc文件。最后,在退出shell时,还会执行 ~/.bash_logout文件。

执 行顺序为:/etc/profile -> (~/.bash_profile | ~/.bash_login | ~/.profile) -> ~/.bashrc ->          /etc/bashrc -> ~/.bash_logout

关于各个文件的作用域,在网上找到了以下说明:
(1)/etc/profile: 此文件为系统的每个用户设置环境信息,当用户第一次登录时,该文件被执行. 并从/etc/profile.d目录的配置文件中搜集shell的设置。

(2)/etc/bashrc: 为每一个运行bash shell的用户执行此文件.当bash shell被打开时,该文件被读取。

(3)~/.bash_profile: 每个用户都可使用该文件输入专用于自己使用的shell信息,当用户登录时,该文件仅仅执行一次!默认情况下,他设置一些环境变量,执行用户的.bashrc文件。

(4)~/.bashrc: 该文件包含专用于你的bash shell的bash信息,当登录时以及每次打开新的shell时,该该文件被读取。

(5)~/.bash_logout: 当每次退出系统(退出bash shell)时,执行该文件. 另外,/etc/profile中设定的变量(全局)的可以作用于任何用户,而~/.bashrc等中设定的变量(局部)只能继承/etc /profile中的变量,他们是"父子"关系。

(6)~/.bash_profile 是交互式、login 方式进入 bash 运行的~/.bashrc 是交互式 non-login 方式进入 bash 运行的通常二者设置大致相同,所以通常前者会调用后者。

我做了个实验,在/etc/profile,/etc/bashrc,~/.bashrc和~/.bash_profile文件的最后追加同一个变量分别赋予不同的值,实验结果表明变量最后的值为~/.bash_profile里的值。(4个文件都没有修改其他设置,都是安装系统后的默认值。)
再有就是4个文件都追加一个值到同一个文件,开机后查看该文件内容的顺序为:
/etc/profile
/etc/bashrc
~/.bashrc
~/.bash_profile

----------------------
其他文章:

redhat bash 初始化设置


先说明三个概念

 

登录shell

正常登录程序启动的shell.既登录成功后紧接着给登录用户启动的shell.

 

非登录交互式shell

这个shell的工作方式是交互式的,等用户输入,然后执行,再等用户输入。显然登录shell就是一个交互式shell。

如下,我们可获得一个交互式非登录shell:

[root@localhost ~]# bash
[root@localhost ~]# pwd
/root

 

非交互式shell

为运行一个shell脚本启动的shell.

 

以FC5的bash为例,跟shell环境配置相关的文件以下几个,

 

/etc/profile
/etc/profile.d/*.sh
/etc/bashrc
~/.bash_profile
~/.bashrc

 

有时你会发现定义一个别名,有时好像在任意一个文件里定义都可以起作用,有时好像又不起作用,那是为什么呢?这些配置文件各自互责了什么工作?相互的关系是怎么样的?跟前面介绍的不同种类的shell的关系是如何的呢?下面对每个文件单独进行说明。

 

/etc/profile


Linux规定,当启动一个登录shell会执行这个脚本. 测试过程如下:

把LIST的定义加到/etc/profile文件的未尾并保存. 如下:
alias LIST='ls -l'

把所有其它shell配置文件或目录改名,这样系统就找不到那些shell脚本了,不会执行,重而避免其它配置文件的干扰。如下:
[root@localhost ~]# mkdir /etc/profile.bak
[root@localhost ~]# mv /etc/profile.d/* -t /etc/profile.bak/
[root@localhost ~]# mv /etc/bashrc /etc/bashrc.bak
[root@localhost ~]# mv ~/.bash_profile ~/.bash_profile.bak
[root@localhost ~]# mv ~/.bashrc ~/.bashrc.bak


交互式shell,并测试过程如下:

[root@localhost ~]# bash
bash-3.1# LIST
bash: LIST: command not found
bash-3.1# exit
exit
[root@localhost ~]#

显然启动一个普通交互式shell的时候, shell配置文件/etc/profile不起作用

非交互式shell, 测试过程如下:

为了验证先写一个测试脚本,如下:

#!/bin/bash
LIST

把这个脚本保存为t.sh并加下可执行权限:
[root@localhost ~]# chmod a+x t.sh
[root@localhost ~]# ./t.sh       
./t.sh: line 2: LIST: command not found
[root@localhost ~]#
显然启动一个非交互式shell时,shell配置文件/etc/profile不起作用


登录shell,并测试过程如下:
Last login: Wed Nov 19 10:22:23 2008 from 192.168.0.97
-bash-3.1# LIST
total 160
drwxr-xr-x  2 root root  4096 Aug 14 12:24 Desktop
-rw-r--r--  1 root root  3211 Nov  6 10:15 Session.vim
drwxr-xr-x  2 root root  4096 Nov 10 10:58 a
-rw-r--r--  1 root root   126 Nov 12 12:42 a.txt
-rw-r--r--  1 root root   261 Nov  6 15:23 a.zip
-rw-r--r--  1 root root   157 Nov  6 15:23 aa.zip
-rw-------  1 root root  1054 Aug 14 11:59 anaconda-ks.cfg
-rw-r--r--  1 root root   691 Nov 18 10:09 b.txt
-rw-r--r--  1 root root 31671 Aug 14 11:58 install.log
-rw-r--r--  1 root root  4155 Aug 14 11:50 install.log.syslog
-rw-------  1 root root 20310 Nov 17 13:51 mbox
drwxr-xr-x  2 root root  4096 Nov 17 17:22 shell
-rwxrwxrwx  1 root root    65 Nov 19 10:11 t.sh
drwxr-xr-x 14 root root  4096 Nov  5 15:34 test
-bash-3.1#
显然启动一个登录shell时,shell配置文件/etc/profile会起作用

 

~/.bash_profile


这个文件跟/etc/profile起作用的时机是一样的,都是只在启动一个登录shell的时候才会被source,跟/etc/profile不同的是,这里的配置只影响单个用户,不对其它用户产生影响。

 

/etc/bashrc与~/.bashrc
从字面上我们可以理解这两个文件应该跟根bash相关,即 只要你启动了一个bash类型的shell这两文件的配置就将发生作用。如果你的shell是sh、csh或是ksh这两个文件将不起作用。按前面的介 绍,可能很会猜测/etc/bashrc与~/.bashrc的关系跟/etc/profile与~/.bash_profile的关系一样,一个是全局 的,一个是针对单个用户的。从结果上看确实是这样的,但实现过程却是不一样的。启动一个bash时直接source ~/.bashrc, 而这~/.bashrc里面会source /etc/bashrc。

 

/etc/profile.d/*.sh


在fc5下这里的脚本会在/etc/profile里或是~/.bashrc里同时source, 所以这里的设置都是一些不同分类的全局环境设置。

 

 

总结在FC5下一个登录bash的环境初始全过程是:

/etc/profile
    |
    --/etc/profile.d/*
~/.bash_profile
    |
    --~/.bashrc
             |
             --/etc/bashrc
                 |
                 --/etc/profile.d/*

一个普通交互式bash的初始全过程是:
~/.bashrc
    |
    --/etc/bashrc
       |
       --/etc/profile.d/*

对于非交互式bash的初始全过程是:
 不重新source 任何新的shell脚本,只继承当前shell的设置.

阅读(4462) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~