What is an easy job for users to make clear and quick enough dot measurement? No matter it is pointing at close distance or long distance, not easy to reach any manual dot projecting tool, it is just making quite satisfied dot measuring result after the use of a 532nm green dot laser alignment. It is always emitting highly visible and bright green laser beam from middle wavelength of 532nm green DPSS laser system. Any time 532nm green laser module gets constant power source from DC power supply and makes good use of cooling system, it just allows easy installation and convenient green dot projection onto various working surfaces effectively.
Being made with an external AC/DC adapter, different from a simple green laser pointer with alkaline battery powers source, this 532nm green dot laser alignment is always working with continuous green laser beam and green reference dot projection from beam aperture. For the most important of all, this 532nm green laser module is also leaving enough space for inner metal heat sink cooling system. After perfect configuration with durable aircraft used aluminum alloy housing tube, either it is pointing under low or high temperature, it is not affecting at all by harsh working environment, but always keeping highly stable green reference dot projection under any other moving, shocking or calibration etc.
Whatever kind of working surface it is pointing, available with wide range output power it is pointing, 532nm green dot laser alignment is performing with highly visible green laser beam at several miles far away. Unless it is pointing under sunlight, high power green laser up to 50mW to 100mW is also making quite satisfied dot alignment at long work distance of 25 meters and other high lighting occasion etc. Every time 532nm is passing through quite strict beam stability tests and aging preventing tests up to 24 hours, it is able to work with good laser light cycling use, and highly clear green dot indication without laser light decay or blur in continuous use.
No matter what output power it is selecting, 532nm gets the most special design part of APC, ACC driving circuit board. It is keeping work with constant output power and electric current supply. The intelligent feedback system just assures the most reliable green dot projection, and reduced possibility of tube burning out or damage. This industrial allows constant dot indication within 8 to 10 hours per day, after its proper installation and adjustment of laser beam focus, it just gets the most precise green dot projection constantly. At the same time, after high attention to thermal energy hurt to eyes and correct wearing of laser safety glasses, makes no mistake and no danger alignment perfectly.
阅读(122) | 评论(0) | 转发(0) |
