Sand making machine equipment maintenance and repair for the first time

For mechanical equipment such as sand making machine, a lot of the time, the key is to solve the problem of repair, routine maintenance is fundamental. Today, we say that the sand making machine daily maintenance and how to:

A regular shutdown open door window observing internal wear, the wear condition of the internal parts such as observation, found that the change of parts must be promptly replaced, avoid machine in the "disease" in production. The replacement parts, professional personnel at the scene to guide the operation.

The in 400 hours of operation need to add grease, 2000 hours of work should open the spindle assembly bearing cleaning, under normal circumstances, after 7200 hours of work, should be replaced with new bearings.

The prohibition on the machine for no load running.

The entry of new sand making machine material should be less than 5 cm, to avoid breaking problem of small amount of production.

The sand making equipment should be operating unattended, work, don't stand in the machine, so as to avoid the material out of hurting people. All the above are usually at work must pay attention to, also can maintain the good products is not repair, but in the maintenance!