Linux下minicom的配置和使用方法

1. 关于USB转串口：大多数已经系统自带驱动。插上USB-serial可以在/dev/ttyUSB0。看到。

2. minicom的配置：

      # minicom -s
      Serial port setup [Enter]
       +-------------------------------------------------------------+
       | A -    Serial Device      : /dev/ttyUSB0                    |
       | B - Lockfile Location     : /var/lock                       |
       | C -   Callin Program      :                                 |
       | D - Callout Program      -:                                 |
       | E -    Bps/Par/Bits       : 115200 8N1                      |
       | F - Hardware Flow Control : No                              |
       | G - Software Flow Control : No                              |
       |                                                             |
       |    Change which setting?                                    |
       +-------------------------------------------------------------+

注: 如果没有使用USB转接口，Serial Device要配置为/dev/ttyS0

   Save setup as dfl
   Exit from Minicom