Chinaunix首页 | 论坛 | 博客
  • 博客访问: 323067
  • 博文数量: 173
  • 博客积分: 0
  • 博客等级: 民兵
  • 技术积分: 1060
  • 用 户 组: 普通用户
  • 注册时间: 2014-11-09 16:23
文章分类

全部博文(173)

文章存档

2015年(66)

2014年(107)

我的朋友

分类: LINUX

2015-01-21 09:47:02

keepalived配置

之前已经安装完成,接下来我们配置keepalived。

假设我的ip地址如下:

server1:192.168.0.150

server2:192.168.0.157

vip:192.168.0.50

在两台上分别执行如下命令:

[@server_150 keepalived]# mkdir /etc/keepalived

[@server_150 keepalived]# cp /usr/local/keepalived/sbin/keepalived /usr/sbin/

[@server_150 keepalived]# cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/

[@server_150 keepalived]# cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

对应操作的含义:

mkdir /etc/keepalived  ##为keepalived创建配置文件目录,默认配置文件从/etc/keepalived下读取 

cp /usr/local/keepalived/sbin/keepalived /usr/sbin/ ##复制keepalived的二进制命令  

cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/  ##提供启动脚本 

cp /usr/local/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/ ##keepalived的主配置文件

编辑/etc/keepalived/keepalived.conf文件,主机修改内容如下:

! Configuration File for keepalived

global_defs {

   notification_e {

     test@localhost.com

   }

   notifiion_email_from localhost@localhost.com

   smtp_server 127.0.0.1

   smtp_connect_timeout 30

   router_id LVS_DEVEL

}

vrrp_instance VI_1 {

    state MASTER

    interface eth0

    virtual_router_id 51

    priority 100

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 1111

    }

    virtual_ipaddress {

        192.168.0.50

    }

}

从配置如下:

! Configuration File for keepalived

global_defs {

   notification_email {

     test@localhost.com

   }

   notification_email_from localhost@localhost.com

   smtp_server 127.0.0.1

   smtp_connect_timeout 30

   router_id LVS_DEVEL

}

vrrp_instance VI_1 {

    state BACKUP

    interface eth0

    virtual_router_id 51

    priority 80

    advert_int 1

    authentication {

        auth_type PASS

        auth_pass 1111

    }

    virtual_ipaddress {

        192.168.0.50

    }

}

启动主从的keepalived:

在主从上分布执行:

[@server_150 ~]# keepalived st

[@server_150 ~]# ip addr

1: lo: mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:66:44:2a brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.150/24 brd 10.10.79.255 scope global eth0

    inet 192.168.0.50/32 scope global eth0

    inet6 fe80::7a2b:cbff:fe66:442a/64 scope link 

       valid_lft forever preferred_lft forever

3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:66:44:2c brd ff:ff:ff:ff:ff:ff

    inet 220.181.26.82/24 brd 220.181.26.255 scope global eth1

    inet6 fe80::7a2b:cbff:fe66:442c/64 scope link 

       valid_lft forever preferred_lft forever

4: eth2: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:66:44:2e brd ff:ff:ff:ff:ff:ff

5: eth3: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:66:44:30 brd ff:ff:ff:ff:ff:ff

6: sit0: mtu 1480 qdisc noop 

    link/sit 0.0.0.0 brd 0.0.0.0

从机:

[@server_157 ~]# keepalived start

[@server_157 ~]# ip addr

1: lo: mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:65:7f:9f brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.157/24 brd 10.10.79.255 scope global eth0

    inet6 fe80::7a2b:cbff:fe65:7f9f/64 scope link 

       valid_lft forever preferred_lft forever

3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:65:7f:a1 brd ff:ff:ff:ff:ff:ff

    inet 220.181.26.92/24 brd 220.181.26.255 scope global eth1

    inet6 fe80::7a2b:cbff:fe65:7fa1/64 scope link 

       valid_lft forever preferred_lft forever

4: eth2: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:65:7f:a3 brd ff:ff:ff:ff:ff:ff

5: eth3: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:65:7f:a5 brd ff:ff:ff:ff:ff:ff

6: sit0: mtu 1480 qdisc noop 

    link/sit 0.0.0.0 brd 0.0.0.0

现在停止从机的keepalived服务,再次查看主从ip addr,与上面的结果一样。

启动从机的keepalived服务,然后停止主机的keepalived服务。

再次查看主从的ip addr

主机:

1: lo: mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:66:44:2a brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.150/24 brd 10.10.79.255 scope global eth0

    inet6 fe80::7a2b:cbff:fe66:442a/64 scope link 

       valid_lft forever preferred_lft forever

3: eth1: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:66:44:2c brd ff:ff:ff:ff:ff:ff

    inet 220.181.26.82/24 brd 220.181.26.255 scope global eth1

    inet6 fe80::7a2b:cbff:fe66:442c/64 scope link 

       valid_lft forever preferred_lft forever

4: eth2: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:66:44:2e brd ff:ff:ff:ff:ff:ff

5: eth3: mtu 1500 qdisc noop qlen 1000

    link/ether 78:2b:cb:66:44:30 brd ff:ff:ff:ff:ff:ff

6: sit0: mtu 1480 qdisc noop 

    link/sit 0.0.0.0 brd 0.0.0.0

从机:

1: lo: mtu 16436 qdisc noqueue 

    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

    inet 127.0.0.1/8 scope host lo

    inet6 ::1/128 scope host 

       valid_lft forever preferred_lft forever

2: eth0: mtu 1500 qdisc pfifo_fast qlen 1000

    link/ether 78:2b:cb:65:7f:9f brd ff:ff:ff:ff:ff:ff

    inet 192.168.0.157/24 brd 10.10.79.255 scope global eth0

&nbs

  • 本文来自:
阅读(816) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~