The introduction of Raymond Mill configuration

Check the electrical system if it meets the requirements of the drawings. Check all the connecting bolts, screw is tightened, particularly in the application h Te, each connecting screws securing bolt tightening. Our machines only ultrafine grinding technology is also the market leader first, ultrafine grinding is a new technology developed rapidly over the past 20 years and can take the raw material with a micron or even nanometer level powder, has been widely used in all areas of life. 
In the seismic isolation design Raymond mill equipment necessary in the seismic capability of evaluating the crushing of the design capacity of the seismic equipment, the motion parameters of the Raymond mill and placed in soil. The lower portion of a motor causes no internal roller mill and the rotation of the grinding wheel is produced to grind milling or grinding, through the air inlet of the wind will blow the finished material, a separator mill, can be separated by coarse powder and then by the mill and the wind came out of the air intake of collection. Volume Control: located in the fan inlet pipe to the air volume control valve is usually opened to the maximum position, according to the production requirements finesse, proper fit. Small air volume, the accuracy is great. Particular attention should be paid to air volume air duct is too small hotel you can easily to precipitate the matter, if you plant adjust accordingly. In the outlet port of the exhaust gas of the normal operation to the control valve of dust fan of the inlet of the tube can be ejected dust.