oil leakage, wear parts such incidents should be the first one of the factors to be considered, because this is the most common cause, but for different machines this happens, you should observe the understanding of the situation and should not be treated the same.
Block making machine is large injection valves, injection volume, normal fat from the nozzle hole is displaced to the hollow shaft, the oil is too large to splash outside the blankets slinger and oil seal leak out, the emergence of this problem, then you need a professional technician to adjust the fuel injection pipe fuel, is necessary to ensure good lubrication watts, it will not rise due to lack of oil or even Burnt big phenomenon.
Block making machine run for a period of time, the hole injection tube is dust clogged hydraulic tubing up close slinger increase the amount of fuel injection nozzles, grease splashes slinger will also cause other than permeability, so we should always clear the clean fuel injection holes.
Another prevention method is to be requested in advance manufacturers will expand injector hole diameter, which can guarantee the bearing lubrication, reducing leakage is not easy to form blocking probability. It is not easy recurrence of similar situation.
阅读(262) | 评论(0) | 转发(0) |
