Solution to the concrete batching mixing plant component faults

's gas system is its execution device, concrete batching mixing plant acts as the role of an industrial computer commands issued promptly switch each aggregate bin, mixer discharge gate, cement, said discharge gate on the cement warehouse cement broken arch. Blowing the additive mixing, and ensure the aggregate, cement, additives, accurate measurement and complete the task of loading the finished material. concrete batching mixing plant technician tells you that only the correct use and maintenance of the system, in order to ensure that the whole production of high efficiency and good economy.
Henan BONA concrete batching mixing plant manufacturers will introduce you the concrete batching mixing plant pneumatic auxiliary component failures solution:
1, lubricator adjustment needle adjustment amount is too small, oil clogged pipeline leak and so will not be atomized liquid droplets, should be timely treatment clogging and leakage Department to adjust the amount of drip to reach 5 drops / min. Normal use, the oil cup to keep the oil in the upper and lower range. Oil cup bottom sediment of the water should be immediately removed.
2, automatic sewage and water inside the oil may not be automatically excluded, should be removed for inspection and cleaning.
3, when the valve is installed on muffler is dirty or clogged, it will also IMPACT valve sensitivity to regular cleaning muffler. 
Henan manufacturer's maintenance personnelly tell you that concrete batching mixing plant as one of the devices commonly used in road construction, concrete batching mixing plant must be timely maintained and timely repaired.