分类： Erlang
2014-07-09 17:09:09
1, from the "Solid Carbide Rougher" chip shape point of
view, the chip becomes thick, flaky, because the chip temperature rises, the
chip color purple smoke.
2, the roughness of the poor, the surface of the
workpiece surface appears bright spots have eating knife marks or ripples.
3, the milling process produces a very serious vibration and abnormal noise.
4, watching from the blade shape, the blade has a bright white spots.
5,
with "" high-speed steel milling cutter steel parts, such
as lubricating oils used during cooling, it will produce a lot of smoke.
When the "Solid Carbide Rougher" cutter passivation should
be promptly stopped and checked cutter wear, minor wear if available Whetstone
grinding the cutting edge, and then use; If you wear too heavy, must be
sharpened to prevent excessive wear cutter.
☆This paper edited by "", please indicate the source !☆
