iwpriv工具通过ioctl动态获取相应无线网卡驱动的private_args所有扩展参数

原文地址：http://blog.csdn.net/zhenwenxian/article/details/4844859

iwpriv工具通过ioctl动态获取相应无线网卡驱动的private_args所有扩展参数

iwpriv是处理下面的wlan_private_args的所有扩展命令,iwpriv的实现上,是这样的,
=>main
=>set_private
=>iw_get_priv_info获取wireless网卡所能处理的所有wlan_private_args类型.

dev_ioctl
=>wext_handle_ioctl
=>wireless_process_ioctl
    if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
        return ioctl_standard_call(dev, ifr, cmd,
                     &iw_handler_get_private);
static int ioctl_standard_call(struct net_device *    dev,
             struct ifreq *        ifr,
             unsigned int        cmd,
             iw_handler        handler)
{
    ...
        /* Call the handler */
        ret = handler(dev, &info, &(iwr->u), extra);
            if (user_length < iwr->u.data.length) {
                kfree(extra);
                return -E2BIG;
//通知iwpriv,本wifi网卡对应的private命令还没有完,还有,这样iwpriv将会继续
//maxpriv默认为16,即将以16个为一组,一组一组的从wifi网卡驱动读取该网卡所能支持的所有private_args参数
//newpriv = realloc(priv, maxpriv * sizeof(priv[0]));继续申请,继续拷贝,知道将wifi网卡自定义的wlan_private_args参数全部
//传出到iwpriv为止.
            }
    ...
}
    /* New driver API : try to find the handler */
    handler = get_handler(dev, cmd);//获取

    if (handler) {
        /* Standard and private are not the same */
        if (cmd < SIOCIWFIRSTPRIV)
            return ioctl_standard_call(dev, ifr, cmd, handler);
        else

//如果有对应的handler,那么处理iwpriv的命令,可以我们的iwpriv都是由dev->do_ioctl完成的.
            return ioctl_private_call(dev, ifr, cmd, handler);
    }
    /* Old driver API : call driver ioctl handler */
    if (dev->do_ioctl)
//如果dev->wireless_handlers->standard和dev->wireless_handlers->private[index都不对该cmd作处理,那么由
//dev->do_ioctl = wlan_do_ioctl;我们驱动的最后处理函数wlan_do_ioctl处理.
        return dev->do_ioctl(dev, ifr, cmd);

static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
{
    /* Don't "optimise" the following variable, it will crash */
    unsigned int    index;        /* *MUST* be unsigned */

    /* Check if we have some wireless handlers defined */
    if (dev->wireless_handlers == NULL)
        return NULL;

    /* Try as a standard command */
    index = cmd - SIOCIWFIRST;
    if (index < dev->wireless_handlers->num_standard)
        return dev->wireless_handlers->standard[index];

    /* Try as a private command */
    index = cmd - SIOCIWFIRSTPRIV;//

    if (index < dev->wireless_handlers->num_private)
        return dev->wireless_handlers->private[index];//该private命令的handler.
    /* Not found */
    return NULL;
}

下面wlan_private_args为本wifi网卡驱动的所能支持的所有命令,也就是iwpriv命令所能支持的所有命令

struct iw_handler_def wlan_handler_def = {
  num_standard:sizeof(wlan_handler) / sizeof(iw_handler),
  num_private:sizeof(wlan_private_handler) / sizeof(iw_handler),
  num_private_args:sizeof(wlan_private_args) / sizeof(struct iw_priv_args),
  standard:(iw_handler *) wlan_handler,
  private:(iw_handler *) wlan_private_handler,
  private_args:(struct iw_priv_args *) wlan_private_args,
#if WIRELESS_EXT > 20
  get_wireless_stats:wlan_get_wireless_stats,
#endif
};

以下为示意代码,我们的wifi网卡驱动支持如下iwpriv命令.

static const struct iw_priv_args wlan_private_args[] = {
     "extscan"
     "hostcmd"
     "arpfilter"
     "regrdwr"
     "sdcmd52rw"
     "sdcmd53rw"
     "setgetconf"
     "getcis"
     "scantype"
     "deauth"
     "getNF"
     "getRSSI"
     "bgscan"
     "enable11d"
     "adhocgrate"
     "sdioclock"
     "wmm"
     "uapsdnullgen"
     "setcoalescing"
     "adhocgprot"
     "setpowercons"
     "wmm_qosinfo"
     "lolisteninter"
     "fwwakeupmethod"
     "psnullinterval"
     "bcnmisto"
     "adhocawakepd"
     "moduletype"
     "autodeepsleep"
     "enhanceps"
     "wakeupmt"
     "setrxant"
     "settxant"
     "authalgs"
     "encryptionmode"
     "setregioncode"
     "setlisteninter"
     "setmultipledtim"
     "setbcnavg"
     "setdataavg
     "associate"
     "getregioncode"
     "getlisteninter"
     "getmultipledtim"
     "gettxrate"
     "getbcnavg"
     "getdataavg"
     "getrxant"
     "gettxant"
     "gettsf"
     "wpssession"
     "deepsleep"
     "adhocstop"
     "radioon"
     "radiooff"
     "rmaeskey"
     "crypto_test"
     "reasso-on"
     "reasso-off"
     "wlanidle-on"
     "wlanidle-off"
     "sleepparams"
     "requesttpc"
     "powercap"
     "measreq"
     "bca-ts"
     "scanmode"
     "getadhocstatus"
     "setgenie"
     "getgenie"
     "qstatus"
     "ts_status"
     "setaeskey"
     "getaeskey"
     "version"
     "verext"
     "setwpaie"
     "setband"
     "setadhocch"
     "chanswann"
     "getband"
     "getadhocch"
     "getlog"
     "tpccfg"
     "scanprobes"
     "ledgpio"
     "sleeppd"
     "rateadapt"
     "getSNR"
     "getrate"
     "getrxinfo"
     "atimwindow"
     "bcninterval"
     "sdiopullctrl"
     "scantime"
     "sysclock"
     "txcontrol"
     "hscfg"
     "hssetpara"
     "inactoext"
     "dbgscfg"
     "drvdbg"
     "drvdelaymax"
     "intfctrl"
     "setquietie"
     ""
     "setuserscan"
     "getscantable"
     "setmrvltlv"
     "getassocrsp"
     "addts"
     "delts"
     "qconfig"
     "qstats"
     "txpktstats"
     "getcfptable"
     "mefcfg"
     "getmem"
};

浅析ethx网卡控制函数ioctl实现具体流程

====================
1.应用层程序iwpriv
wireless tools网络配置应用程序iwpriv命令格式:
iwpriv ethX private-command [parameters]

iwpriv部分实现源码如下:
int main(int argc, char *argv[])
{
    ...
    sockfd = socket(AF_INET, SOCK_STREAM, 0);
    ...
    ioctl(sockfd, ioctl_val, &iwr);//将控制命令通过ioctl发送到无线网卡
    ...
}
====================
2.系统调用sys_ioctl
应用层通过ioctl(sockfd, ioctl_val, &iwr);触发sys_ioctl系统调用,实际流程:
sys_ioctl=>vfs_ioctl=>do_ioctl=最后调用
filp->f_op->unlocked_ioctl执行具体的ioctl操作,该操作就是sock_ioctl,至于为什么是sock_ioctl,后边作了进一步分析
sock_ioctl=>
{
    ...
    #ifdef CONFIG_WIRELESS_EXT
        if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
            err = dev_ioctl(net, cmd, argp);//

        } else
    #endif
    ...
}
dev_ioctl=>wext_handle_ioctl
{
    ...
/* Take care of Wireless Extensions */
    if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
        return wext_handle_ioctl(net, &ifr, cmd, arg);
    ...
}
wext_handle_ioctl=>wireless_process_ioctl=>
然后通过if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)函数,
从系统管理的net链表中,把ioctl指定的ethX对应的struct net_device摘出来,
最后调用ioctl_private_call(handler)或者调用dev->do_ioctl(dev, ifr, cmd)来处理该ioctl,
这两个函数分别指向wlan_handler_def和wlan_do_ioctl
====================
3.wifi网卡是怎么登记到kernel上的
wlan_probe()=>wlan_add_card()=>alloc_etherdev()=>
之后将操作方法添加到struct net_device *dev=alloc_etherdev()申请的dev上去,其中包括:
    ...
    /* Setup the OS Interface to our functions */
    dev->open = wlan_open;
    dev->hard_start_xmit = wlan_hard_start_xmit;
    dev->stop = wlan_close;
    dev->do_ioctl = wlan_do_ioctl;
    dev->set_mac_address = wlan_set_mac_address;

    dev->tx_timeout = wlan_tx_timeout;
    dev->get_stats = wlan_get_stats;
    dev->watchdog_timeo = MRVDRV_DEFAULT_WATCHDOG_TIMEOUT;
    dev->wireless_handlers = (struct iw_handler_def *) &wlan_handler_def;
    dev->set_multicast_list = wlan_set_multicast_list;
    ...
4.socket系统调用如何关联上ioctl和ethX设备

asmlinkage long sys_socket(int family, int type, int protocol);

sys_socket=>sock_create=>__sock_create=>sock = sock_alloc();通过sock_mnt->mnt_sb从socket文件系统的超级块上申请一个inode节点,这样也就同时获得了由该inode描述的一个sock结构体单元,所以sokcet和dentry目录项等效,
接下来从net_families全局管理结构体中找到当前family对应的ops操作集,
net_proto_family *pf=net_families[family];
pf->create(net, sock, protocol);//核心调用,对于ipv4,就是inet_create
以ipv4为例
static struct net_proto_family inet_family_ops = {
    .family = PF_INET,
    .create = inet_create,
    .owner    = THIS_MODULE,
};
还记得上面应用层创建sokcet的函数吧,
sockfd = socket(AF_INET, SOCK_STREAM, 0);//AF_INET虽然等于PF_INET,但是因为种种原因我们提倡使用PF_INET
可见family等于AF_INET,type等于SOCK_STREAM,协议protocol为0,也就是采用IP协议,
inet_create=>inetsw[sock->type]也就是inetsw[SOCK_STREAM],
从inetsw[sock->type]中找到已经登记的protocol网络协议处理函数,
inetsw[]是怎么填充的呢?inet_init()=>inet_register_protosw(inetsw_array)=>这样inetsw_array中的所有protocol处理模块都将登记到inetsw中了,
static struct inet_protosw inetsw_array[] =
{
    {
        .type = SOCK_STREAM,
        .protocol = IPPROTO_TCP,
        .prot = &tcp_prot,
        .ops = &inet_stream_ops,
        .capability = -1,
        .no_check = 0,
        .flags = INET_PROTOSW_PERMANENT | INET_PROTOSW_ICSK,
    },

    {
        .type = SOCK_DGRAM,
        .protocol = IPPROTO_UDP,
        .prot = &udp_prot,
        .ops = &inet_dgram_ops,
        .capability = -1,
        .no_check = UDP_CSUM_DEFAULT,
        .flags = INET_PROTOSW_PERMANENT,
    },

    {
        .type = SOCK_RAW,
        .protocol = IPPROTO_IP,    /* wild card */
        .prot = &raw_prot,
        .ops = &inet_sockraw_ops,
        .capability = CAP_NET_RAW,
        .no_check = UDP_CSUM_DEFAULT,
        .flags = INET_PROTOSW_REUSE,
    }
};
至于inet_init,则是以fs_initcall(inet_init)方式,以5号优先级被build in到了内核中,当kernel启动时会在start_kernel=>rest_init=>kernel_init=>do_basic_setup=>do_initcalls中依据优先级号优先于其他module驱动被调用.
这样sock->ops = answer->ops;对于ipv4也就等于inet_stream_ops,
接下来就是将ops填充到file操作指针中了,
sys_socket=>sock_map_fd=>sock_attach_fd=>
dentry->d_op = &sockfs_dentry_operations;
init_file(file, sock_mnt, dentry, FMODE_READ | FMODE_WRITE, &socket_file_ops);
file->private_data = sock;
其中init_file=>file->f_op = fop;也就是file->f_op = socket_file_ops;
所以read(),wirte(),poll()和ioctl()应用程序调用的file->f_op就是socket_file_ops了,
比如:
read()对应sock_aio_read网络异步读
write()对应sock_aio_write网络异步写
ioctl()对应sock_ioctl

socket_file_ops结构体具体实现如下:
static const struct file_operations socket_file_ops = {
    .owner =    THIS_MODULE,
    .llseek =    no_llseek,
    .aio_read =    sock_aio_read,
    .aio_write =    sock_aio_write,
    .poll =        sock_poll,
    .unlocked_ioctl = sock_ioctl,
#ifdef CONFIG_COMPAT
    .compat_ioctl = compat_sock_ioctl,
#endif
    .mmap =        sock_mmap,
    .open =        sock_no_open,    /* special open code to disallow open via /proc */
    .release =    sock_close,
    .fasync =    sock_fasync,
    .sendpage =    sock_sendpage,
    .splice_write = generic_splice_sendpage,
};
网卡控制因为涉及到的知识点比较多,上面只是从宏观上对数据流程做了一个简单的介绍,深入到其中的每个知识点,都会牵扯出一系列文章,读者需要自己去一个个的慢慢深入,希望本文能够对刚刚接触网络驱动的读者有所帮助和启发【gliethttp.Leith】

wireless extention扩展接口Blog作者的回复:
wlan_add_card=>
wlan_create_thread(wlan_service_main_thread, &priv->MainThread, "wlan_main_service");
=>wlan_service_main_thread=>wlan_exec_next_cmd=>
将调用wlan_enter_ps和wlan_exit_ps

sbi_interrupt=>从sdio口上传来的中断数据,sdio_irq_thread=>process_sdio_pending_irqs=>调用func->irq_handler(func);即本.
在mmc_signal_sdio_irq=>将调用wake_up_process(host->sdio_irq_thread);来唤醒该irq处理线程,可能还有其他命令需要处理wlan_exec_next_cmd
这个pxamci_irq就是mmc的物理irq中断了,pxamci_irq=>mmc_signal_sdio_irq(host->mmc);

wlan_exec_next_cmd=>只要cmd链表上CmdNode还存在,
那么就会执行wlan_dnld_cmd_to_fw(wlan_private * priv, CmdCtrlNode * CmdNode)将CmdNode中的数据下发下去,
然后重新触发wlan_mod_timer(&Adapter->MrvDrvCommandTimer, MRVDRV_TIMER_5S);
也就是wlan_cmd_timeout_func命令超时处理函数,
在cmd已经有了恢复之后,在主线程中调用wlan_process_cmdresp,立即调用wlan_cancel_timer(&Adapter->MrvDrvCommandTimer);来删除定时器

wlan_service_main_thread=>每次唤醒都会检查
====
    /* Execute the next command */
    if (!priv->wlan_dev.cmd_sent && !Adapter->CurCmd)
        wlan_exec_next_cmd(priv);
====

wlan_prepare_cmd=>
wlan_hostcmd_ioctl=>
获取一个空闲的CmdNode节点wlan_get_cmd_node,当完成赋值之后,执行如下语句,将CmdNode节点添加到处理队列中:
wlan_insert_cmd_to_pending_q(Adapter, CmdNode, TRUE);
wake_up_interruptible(&priv->MainThread.waitQ);
另外在数组中
/*
 * iwconfig settable callbacks 
 */
static const iw_handler wlan_handler[]这个数组中全部是回调函数,

/** wlan_handler_def */
struct iw_handler_def wlan_handler_def = {
  num_standard:sizeof(wlan_handler) / sizeof(iw_handler),
  num_private:sizeof(wlan_private_handler) / sizeof(iw_handler),
  num_private_args:sizeof(wlan_private_args) / sizeof(struct iw_priv_args),
  standard:(iw_handler *) wlan_handler,
  private:(iw_handler *) wlan_private_handler,
  private_args:(struct iw_priv_args *) wlan_private_args,
#if WIRELESS_EXT > 20
  get_wireless_stats:wlan_get_wireless_stats,
#endif
};
在wlan_add_card函数中
dev->wireless_handlers = (struct iw_handler_def *) &wlan_handler_def;

===============在kernel的net中使用wireless extention扩展接口

static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
{
    /* Don't "optimise" the following variable, it will crash */
    unsigned int    index;        /* *MUST* be unsigned */

    /* Check if we have some wireless handlers defined */
    if (dev->wireless_handlers == NULL)
        return NULL;

    /* Try as a standard command */
    index = cmd - SIOCIWFIRST;
    if (index < dev->wireless_handlers->num_standard)
        return dev->wireless_handlers->standard[index];

    /* Try as a private command */
    index = cmd - SIOCIWFIRSTPRIV;
    if (index < dev->wireless_handlers->num_private)
        return dev->wireless_handlers->private[index];

    /* Not found */
    return NULL;
}

=>sock_ioctl
=>dev_ioctl
+++/* Take care of Wireless Extensions */
+++if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST)
+++return wext_handle_ioctl(net, &ifr, cmd, arg);
=>wext_handle_ioctl
=>wireless_process_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd)
=>get_handler(dev, cmd);如果没有实现该cmd,那么将调用dev->do_ioctl来处理,

wlan_reassoc_timer_func=>
wmm_start_queue=>
wlan_tx_packet=>
wlan_tx_timeout=>
wlan_remove_card=>
wlan_hostcmd_ioctl=>
wlan_auto_deep_sleep=>
wlan_set_deep_sleep=>
wlan_prepare_cmd=>
wlan_cmd_timeout_func=>
将调用wake_up_interruptible(&priv->MainThread.waitQ);唤醒wlan_service_main_thread主处理线程.

wlan_hard_start_xmit=>wlan_tx_packet发送数据包
dev->tx_timeout = wlan_tx_timeout;
wlan_initialize_timer(&Adapter->MrvDrvCommandTimer, wlan_cmd_timeout_func, priv);

int wlan_do_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
{
    ...
        case WLAN_WAKEUP_MT:
            if (wrq->u.data.length > 0)
                Adapter->IntCounter++;
            wake_up_interruptible(&priv->MainThread.waitQ);
            break;
    ...
}

在wlan_process_cmdresp()处理完该cmd之后,调用
wlan_insert_cmd_to_free_q=>wlan_clean_cmd_noder,从命令链表上删除已经处理完成的cmd_node,
wlan_clean_cmd_noder然后pTempNode->CmdWaitQWoken = TRUE;同时如果该cmd_node是一个被阻塞等待的,那么唤醒等待的程序.
wake_up_interruptible(&pTempNode->cmdwait_q);