A variety of adverse approach "" Jacquard Ribbon manufacturing process always appear, will bring customers leave a bad impression, then how to avoid these problems? First by "Yoyo badge reel" factory to you Ribbon jumper talk about the reasons and causes of the deviation of product size:
"" Jacquard Ribbon jumper reasons:
1, the block did not stop the needle bar is good;
2, the position of the weft needle and the needle is not for good.
Protective measures:
1, the gear lever position by the needle shipped needles;
2, the weft and weave needle for a good bit, so that the weft can all hang finished.
"Yoyo badge reel" reason Jacquard Ribbon size deviations:
1, raw uneven thickness, so that "Yoyo badge reel" Ribbon of different sizes: the amount of webbing width should always found defective immediately when transferred over.
2, steel buckle dress is too big or too small, so the size Ribbon: Do not wear steel buckle dress too large or small, failed to re-dress to wear, not reluctantly production.
3, weft wheel loose during operation: tighten the fixed weft round.
4, weft over lever spring, there have yarn hair go: look outside often loose spring, so there are yarn hair can come out.
Learn these preventive methods in the future will be able to better prevention "Yoyo badge reel" and deviation problems webbing straps size jumper with the customer requirements.
【This paper edited by "Yoyo badge reel", please indicate the source !】
Source:
阅读(264) | 评论(0) | 转发(0) |
