What Machines Can Be Used to Process Metal Materials

Recently, we received several consults on what machines can be used to process metal materials. Some of the stones are of high hardness so that they can only be crushed partially. Now, we will brief on the machines that crushing metal materials. Most of the cassiterites and sulphide ores are metal materials. Apart from that, other metallic ores are sulphide ores, which are brisk and fragile. As for the cassiterite, it is still brisk and easy for argillization while it is quite hard. During the crushing, it may tend to smash. And most of the beneficial mineral ores are fragile. Among the mineral ores, gangues are usually silicates, which are tetrahedral, hard, and difficult to crush. And this can explain why these stones don't have the apparent optional breaking, for which we should pick up the most suitable equipment. The cone crusher has a crushing principle of 'the main crushing, supplemented by the grinding', which can not meet the requirement.

The metal mineral ores have innumerous categories as well as a wide range of particle size, which results in more fragile surfaces and lower the actual strength of mineral ores. Based on the compressive resistance experiment, we found this kind of stones is fragile and brisk, having a number of fragile surfaces and apparent optional breaking phenomenon during crushing. As for these stones, we should choose the crushing equipments which have good optional breaking function, high crushing rate to split the materials as relatively big particle. The impact crusher can take palce of , and is able to meet the current requirement. This progress turns the crushing process to the two-stage open circle crushing process. The discharge of the impact crusher and the materials screened by the vibrating screen can both be finished products, which can not only ease the crushing process, but also realize the optional breaking to meet the basic requirement of metallic ores crushing.

tyre mobile screen station: