The Rod mill will be replaced by fine sand making machine

For artificial sand technology, it is going forward and developing after countless times explore and trails. In the beginning, we used fine crusher and rod mill to make sand which not only consume a lot of water and electricity, but also have low sand yield, powder loss with water and serious waste. The vertical shaft impact sand making machine changed the situation.

The vertical shaft impact sand making machine adopts stone hitting stone and stone hitting iron pattern to make sand. First, the raw material drop down from distributing cone. The lateral falling material will form material curtain and the inside falling will get into the impeller and be centrifugal accelerated. The accelerated material will impact to the material curtain by linear velocity 70m/s speed. This is stone hitting stone part. Then the impacting material and impacted material will impact to the guard plated and form the second crushing stone hitting iron.

The vertical shaft sand making machine is high efficient sand making machine.It can be applied to basalt, limestone, granite, diabase, andesite, rhyolite, marble, pebble for making sand.

Today's fine  is a new generation of vertical shaft impact crusher which is equipped with hydraulic check inventory maintenance system, the current frequency conversion control system, independent thin oil terminal lubrication cycle system and temperature warning system, is a modern sand making machine equipment. Shanghai Jianye  is a new type of fine sand making machine.

With the development of fine sand making machine, the fineness modulus and the gradation adjustment is not a problem. So the traditional rod mill will be replaced gradually.

The article from