impact plate on performance of crusher

Influence of angle of guide plate for feeding on performance of crusher Angle of guide plate is an important parameter. The smaller the angle is, the slower the speed of the material along guide plate is. And materials can be fully crushed. But too small angle will influence productivity, or even generate stacking phenomenon. The bigger the angle is, the faster the gliding speed of materials is. However, too big angle easily makes materials not be fully crushed and influence product quality. Influence of rotating speed of rotor on performance of crusher Rotating speed of rotor is one of the most important parameters of impact crushing machine, which plays a decisive role in size of production capacity, product granularity and reduction ratio of impact crusher. Test shows that production capacity and reduction ratio can be increased significantly with the increase of rotating speed of rotor. And product granularity changes towards fineness. However, with the increase of rotor speed, the power consumption also increases, so does the abrasion of plate hammer. Of course, the requirements on manufacturing precision are also higher correspondingly. From the above analysis, we can see the influence of parameters on performance of impact crusher. if the parameters are designed and selected improperly, it not only cannot give full play to performance of crusher, but even lead to abnormal work of machine. Hence, optimizing and reasonably matching parameters of crushers are crucial to improve production capacity and reduce operational cost.