Banks of electrowinning cells with cathodes. Copper on the annodes ranges from 99.0 to 99.5 percent pure. Power consumed in electroplating copper ranges from 0.08 to 0.20 KWH per pound of copper. Any gold or silver in the copper does not plate out and drops to the bottom of the cell with the sludge to be recovered later.Conveyors and trucks deposit coarse ore on a heap leach pad, which has a series of pipes and hoses dispensing a diluted sulfuric acid solution to the ore. Copper is dissolved and flows to a pond at the bottom of the pad. This process can take several months. The leached solution is pumped to the SX (Solvent Extraction) circuit, which looks like a series of agitation tanks or cells. The fine sulfide ore is sent to froth flotation cells like those below for recovery.The concentrates from the flotation cells are sent to the smelter for processing to a copper plate. The copper plate is then dissolved in sulfuric acid and sent to the electrowinning cells for plating onto cathodes, along with the concentrated copper from the SX circuits. The copper leach solution typically consists of 40 gm of copper and 200 gm sulfuric acid per liter. Current densities on the electrowinning cells can be 300 amperes per square foot, or more.
阅读(242) | 评论(0) | 转发(0) |
