When the autosampler and thermostat autosampler any powered "", must not disconnect or reconnect the cable between the two parts. This will destroy the circuit module.
Unplug the power cord from the autosampler and thermostat "" on the autosampler can power off the line. But even autosampler front panel power switch is turned off, the autosampler still live, make sure that you can always unplug the power cord.
If the "Bimetal temperature switch" devices connected to the line voltage exceeds the specified will cause electric shock or equipment damage.
To ensure that the condensate pipe has been on the vessel surface. If the condensate pipe out into the liquid condensate from the fluid in the pipe is not blocked out and exit. This will damage the instrument's circuitry.
Source:
阅读(211) | 评论(0) | 转发(0) |
