2014年(381)
分类: DB2/Informix
2014-06-20 19:57:38
"Single flute End Mills" mainly depends on the choice of
cutting the workpiece material; feed rate mainly depends on the choice of
material and the diameter of the end mill machining the workpiece. Some foreign
"" tool manufacturers tool cutting tool parameters
with sample selection table for reference. But at the same time cutting
parameters selected by the machine tool systems affected the shape of the
workpiece and fix and other factors, should be adjusted cutting speed and feed
speed according to the actual situation.
When in "Single flute End
Mills" tool life as a priority consideration may be appropriate to
reduce the cutting speed and feed rate; chips from the blade when the situation
is not good, may be appropriate to increase the cutting speed.
[This paper
edited by "", please indicate the source !]