An engineer from Bona shares concrete mixer users the steps to clean wet cement as fllow:
1.Once a cement mixer is properly cleaned, it is easy to maintain. The key is to clean it promptly after each use.
2.Use a hose to fill the mixer with 3-4 gallons of water.
3.Add in a couple shovels full of crushed rock.
4.Turn the mixer on and allow it to spin.
5.The gravel will move with the water and scrape the cement off of the sides.
6.Tilt the machine to clean all the way to the edges.
7.Once the cement has been removed, drain the water and gravel.
8.If the is used frequently, it may be helpful to build a small “cleaning station.” Fill an area larger than your mixer with at least a half a foot of gravel with crushed rock on top. When you are finished cleaning, simply drain the mixer right onto the same area. The cement water will drain to the bottom, while the rock stays clean on top. Simply scoop from the area each time. This provides an easy area for cleaning as well as allows you to reuse the crushed rock.
9.Use a hose or pressure washer to remove any remaining residue from the interior and exterior of the machine.
10.Dry the machine prior to storing.
Ok, that is over.If you have any questions about cleanning a , you can contact any Bona staff, he/she will help you to solve your problem.
Email:concrete.sales@zzbona.com
Tel:0086-371-8709 1886
Skype:kevinlee02
website:.
Add:No.39,Huayuan Road,Jinshui District, Zhengzhou City,Henan Province,China.
