A20 配置

TN92屏的显示配置：

screen0_output_type=1;
screen0_output_mode=5;
lcd_x=800;
lcd_y=480;
lcd_swap=0;
lcd_dclk_freq=33;
lcd_hbp=46;
lcd_ht=1055;
lcd_vbp=23;
lcd_vt=1050;
lcd_lvds_ch=1;
lcd_lvds_mode=0;
lcd_lvds_bitwidth=0;
lcd_lvds_io_cross=0;
lcd_if=0;

N101BCG-L21屏的显示配置：

screen0_output_type=1;
screen0_output_mode=2;
lcd_x=1366;
lcd_y=768;
lcd_dclk_freq=75;
lcd_hbp=90;
lcd_ht=1612;
lcd_vbp=10;
lcd_vt=3010;
lcd_lvds_ch=0;
lcd_lvds_mode=0;
lcd_lvds_bitwidth=1;
lcd_lvds_io_cross=0;

lcd_if=3;

FT5206配置

[ctp_para]
ctp_used                           = 1
ctp_name                          = "gsl1680"
ctp_twi_id                         = 2
ctp_twi_addr                    = 0x40
ctp_screen_max_x         = 800                       //修改x
ctp_screen_max_y         = 480                       //修改y
ctp_revert_x_flag            = 0
ctp_revert_y_flag            = 0
ctp_exchange_x_y_flag = 0                           //修改x,y翻转

ctp_int_port                     = port:PH21<6>
ctp_wakeup                     = port:PB13<1><1>

修改 android4.2/out/target/product/wing-mbox203/root/init.sun7i.rc 文件
追加 insmod /system/vendor/modules/ft5x_ts.ko

USB2配置

[usbc2]
usb_used            = 1
usb_port_type       = 1
usb_detect_type     = 0
usb_drv_vbus_gpio   = port:PH03<1><0><0>
usb_restrict_gpio   =

usb_host_init_state = 1             //修改为1
usb_restric_flag    = 0