Chinaunix首页 | 论坛 | 博客

sweet-smile的ChinaUnix博客

首页　| 　博文目录　| 　关于我

sweet-smile

  • 博客访问： 137994
  • 博文数量： 28
  • 博客积分： 0
  • 博客等级： 民兵
  • 技术积分： 165
  • 用 户 组： 普通用户
  • 注册时间： 2013-07-14 10:02
文章分类

全部博文（28）

文章存档

2014年（12）

2013年（16）

我的朋友
最近访客
推荐博文
相关博文
U-BOOT引导Linux-2.6.32内核进入文件系统

分类： 嵌入式

2014-07-09 23:24:48

自己的内核有了，文件系统也有了，该是用u-boot的时候了，哈哈。

查看主机IP
[root@localhost tftpboot]# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:0C:29:C1:59:FF  
          inet addr:10.50.80.207  Bcast:10.50.81.255  Mask:255.255.254.0
          inet6 addr: 2001:da8:4002:113:20c:29ff:fec1:59ff/64 Scope:Global
          inet6 addr: fe80::20c:29ff:fec1:59ff/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12487 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1617 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:962360 (939.8 KiB)  TX bytes:2336470 (2.2 MiB)
          Interrupt:18 Base address:0x2000 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:1614 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1614 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:82972 (81.0 KiB)  TX bytes:82972 (81.0 KiB)

比较奇葩的ip，哈哈。学校的网，正常的。

在vivi菜单中，分别下载u-boot，uImage，rootfs.img
选择NAND启动，启动之前按任意键进入U-BOOT命令模式，根据主机和需要设置U-BOOT参数并保存：
  1. I2C: ready
  2. DRAM: 64 MB
  3. Flash: 2 MB
  4. NAND: 256 MiB
  5. Video: 240x320x16 20kHz 62Hz
  6. In: serial
  7. Out: serial
  8. Err: serial
  9. Net: dm9000
  10. U-Boot 2009.11 ( 7鏈?06 2014 - 14:21:34)
  11. modified by fxc
  12. Love Linux
  13. Hit any key to stop autoboot: 0
  14. [u-boot@MINI2440]# setenv bootargs noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M
  15. [u-boot@MINI2440]# setenv bootcmd nand read 0x31000000 0x60000 0x500000\;bootm 0x31000000
  16. [u-boot@MINI2440]# setenv serverip 10.50.80.207
  17. [u-boot@MINI2440]# setenv gatewayip 10.50.80.207
  18. [u-boot@MINI2440]# setenv ipaddr 10.50.80.1
  19. [u-boot@MINI2440]# setenv netmask 255.255.254.0
  20. [u-boot@MINI2440]# printenv
  21. bootdelay=1
  22. baudrate=115200
  23. ethaddr=08:08:11:18:12:27
  24. tekkaman=bmp d 70000
  25.  stdin=serial
  26. stdout=serial
  27. stderr=serial
  28. ethact=dm9000
  29. bootargs=noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M
  30. bootcmd=nand read 0x31000000 0x60000 0x500000;bootm 0x31000000
  31. serverip=10.50.80.207
  32. gatewayip=10.50.80.207
  33. ipaddr=10.50.80.1
  34. netmask=255.255.254.0
  35. Environment size: 383/131068 bytes
  36. [u-boot@MINI2440]# saveenv
  37. Saving Environment to NAND...
  38. Erasing Nand...
  39. Erasing at 0x6000000000002 -- 0% complete.
  40. Writing to Nand... done
  41. [u-boot@MINI2440]#
########其实此时IP不是重点，咱不是从NAND启动嘛#########
uImage和rootfs.img都是经过验证正确无误，u-boot参数也保存了，此时我直接重启开发板，应该是直接自启动了吧，于是复位重启！
错误出现了，居然没有正常启动 !!!
  1. I2C: ready
  2. DRAM: 64 MB
  3. Flash: 2 MB
  4. NAND: 256 MiB
  5. Video: 240x320x16 20kHz 62Hz
  6. In: serial
  7. Out: serial
  8. Err: serial
  9. Net: dm9000
  10. U-Boot 2009.11 ( 7鏈?06 2014 - 14:21:34)
  11. modified by fxc
  12. Love Linux
  13. Hit any key to stop autoboot: 0
  14. NAND read: device 0 offset 0x60000, size 0x500000
  15. NAND read from offset 60000ffffffff failed 0
  16.  5242880 bytes read: ERROR
  17. Wrong Image Format for bootm command
  18. ERROR: can't get kernel
  19. [u-boot@MINI2440]#
u-boot，uImage，rootfs.img都在里边了，为什么不行呢？让他们继续在NandFlash里待着吧！
利用交叉网线将开发板和电脑相连，启动开发板并进入U-BOOT命令模式，做如下工作：
（1）利用tftp命令下载内核到内存0x31000000
（2）使用nand erase命令擦除kernel分区（0x00060000-0x00500000）
（3）使用nand write命令将刚下载到内存0x31000000处的uImage写入kernel分区（0x00060000-0x00500000）
（4）启动内核：bootm 0x31000000,此时内核启动成功，并成功进入文件系统，O(∩_∩)O哈哈~ 
[u-boot@MINI2440]# tftp 0x31000000 uImage 
  1. dm9000 i/o: 0x20000300, id: 0x90000a46
  2. DM9000: running in 16 bit mode
  3. MAC: 08:08:11:18:12:27
  4. operating at 100M full duplex mode
  5. Using dm9000 device
  6. TFTP from server 10.50.80.207; our IP address is 10.50.80.1
  7. Filename 'uImage'.
  8. Load address: 0x31000000
  9. Loading: T #################################################################
  10.          #################################################################
  11.          ########################
  12. done
  13. Bytes transferred = 2255048 (2268c8 hex)
[u-boot@MINI2440]# nand erase 0x40000 500000
  1. NAND erase: device 0 offset 0x40000, size 0x500000
  2. Erasing at 0x52000002800000 -- 0% complete.
  3. OK
[u-boot@MINI2440]# nand write 0x31000000 0x60000 500000
  1. NAND write: device 0 offset 0x60000, size 0x500000
  2. Writing at 0x54000000020000 -- 100% is complete. 5242880 bytes written: OK
[u-boot@MINI2440]# bootm 0x31000000
  1. ## Booting kernel from Legacy Image at 31000000 ...
  2.    Image Name: mini2440_linux
  3.    Created: 2014-07-08 15:02:40 UTC
  4.    Image Type: ARM Linux Kernel Image (uncompressed)
  5.    Data Size: 2254984 Bytes = 2.2 MB
  6.    Load Address: 31000000
  7.    Entry Point: 31000040
  8.    Verifying Checksum ... OK
  9.    XIP Kernel Image ... OK
  10. OK


  13. Starting kernel ...


  16. Uncompressing Linux................................................................................................................................................. done, booting the kernel.
  17. Linux version 2.6.32-FriendlyARM (root@localhost.localdomain) (gcc version 4.4.3 (ctng-1.6.1) ) #5 Tue Jul 8 22:29:19 CST 2014
  18. CPU: ARM920T [41129200] revision 0 (ARMv4T), cr=c0007177
  19. CPU: VIVT data cache, VIVT instruction cache
  20. Machine: FriendlyARM MINI2440
  21. Memory policy: ECC disabled, Data cache writeback
  22. CPU S3C2440A (id 0x32440001)
  23. S3C24XX Clocks, (c) 2004 Simtec Electronics
  24. S3C244X: core 405.000 MHz, memory 101.250 MHz, peripheral 50.625 MHz
  25. CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on
  26. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  27. Kernel command line: noinitrd root=/dev/mtdblock3 rootfstype=yaffs2 rw console=ttySAC0,115200 init=/linuxrc mem=64M
  28. PID hash table entries: 256 (order: -2, 1024 bytes)
  29. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  31. Memory: 64MB = 64MB total
  32. Memory: 60108KB available (4172K code, 449K data, 116K init, 0K highmem)
  33. SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. Hierarchical RCU implementation.
  35. NR_IRQS:85
  36. irq: clearing subpending status 00000003
  37. irq: clearing subpending status 00000002
  38. Console: colour dummy device 80x30
  39. console [ttySAC0] enabled
  40. Calibrating delay loop... 201.93 BogoMIPS (lpj=504832)
  41. Mount-cache hash table entries: 512
  42. CPU: Testing write buffer coherency: ok
  43. NET: Registered protocol family 16
  44. S3C2440: Initialising architecture
  45. S3C2440: IRQ Support
  46. S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  47. DMA channel 0 at c4808000, irq 33
  48. DMA channel 1 at c4808040, irq 34
  49. DMA channel 2 at c4808080, irq 35
  50. DMA channel 3 at c48080c0, irq 36
  51. S3C244X: Clock Support, DVS off
  52. bio: create slab <bio-0> at 0
  53. SCSI subsystem initialized
  54. usbcore: registered new interface driver usbfs
  55. usbcore: registered new interface driver hub
  56. usbcore: registered new device driver usb
  57. s3c-i2c s3c2440-i2c: slave address 0x10
  58. s3c-i2c s3c2440-i2c: bus frequency set to 98 KHz
  59. s3c-i2c s3c2440-i2c: i2c-0: S3C I2C adapter
  60. NET: Registered protocol family 2
  61. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  63. TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  64. TCP: Hash tables configured (established 2048 bind 2048)
  65. TCP reno registered
  66. NET: Registered protocol family 1
  67. RPC: Registered udp transport module.
  68. RPC: Registered tcp transport module.
  69. RPC: Registered tcp NFSv4.1 backchannel transport module.
  70. NetWinder Floating Point Emulator V0.97 (double precision)
  71. yaffs Jul 8 2014 22:21:53 Installing.
  72. msgmni has been set to 117
  73. alg: No test for stdrng (krng)
  74. io scheduler noop registered (default)
  75. Console: switching to colour frame buffer device 30x20
  76. fb0: s3c2410fb frame buffer device
  77. s3c2440-uart.0: s3c2410_serial0 at MMIO 0x50000000 (irq = 70) is a S3C2440
  78. s3c2440-uart.1: s3c2410_serial1 at MMIO 0x50004000 (irq = 73) is a S3C2440
  79. s3c2440-uart.2: s3c2410_serial2 at MMIO 0x50008000 (irq = 76) is a S3C2440
  80. loop: module loaded
  81. S3C24XX NAND Driver, (c) 2004 Simtec Electronics
  82. s3c24xx-nand s3c2440-nand: Tacls=3, 29ns Twrph0=7 69ns, Twrph1=3 29ns
  83. s3c24xx-nand s3c2440-nand: NAND soft ECC
  84. NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bit)
  85. Scanning device for bad blocks
  86. Bad eraseblock 250 at 0x000001f40000
  87. Creating 5 MTD partitions on "NAND 256MiB 3,3V 8-bit":
  88. 0x000000000000-0x000000040000 : "boot"
  89. 0x000000040000-0x000000060000 : "param"
  90. 0x000000060000-0x000000560000 : "Kernel"
  91. 0x000000560000-0x000040560000 : "root"
  92. mtd: partition "root" extends beyond the end of device "NAND 256MiB 3,3V 8-bit" -- size truncated to 0xfaa0000
  93. 0x000000000000-0x000040000000 : "nand"
  94. mtd: partition "nand" extends beyond the end of device "NAND 256MiB 3,3V 8-bit" -- size truncated to 0x10000000
  95. dm9000 Ethernet Driver, V1.31
  96. eth0: dm9000e at c4810300,c4814304 IRQ 51 MAC: 08:90:90:90:90:90 (chip)
  97. ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  98. s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
  99. s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
  100. s3c2410-ohci s3c2410-ohci: irq 42, io mem 0x49000000
  101. usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
  102. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  103. usb usb1: Product: S3C24XX OHCI
  104. usb usb1: Manufacturer: Linux 2.6.32-FriendlyARM ohci_hcd
  105. usb usb1: SerialNumber: s3c24xx
  106. usb usb1: configuration #1 chosen from 1 choice
  107. hub 1-0:1.0: USB hub found
  108. hub 1-0:1.0: 2 ports detected
  109. Initializing USB Mass Storage driver...
  110. usbcore: registered new interface driver usb-storage
  111. USB Mass Storage support registered.
  112. usbcore: registered new interface driver ums-alauda
  113. usbcore: registered new interface driver ums-cypress
  114. usbcore: registered new interface driver ums-datafab
  115. usbcore: registered new interface driver ums-freecom
  116. usbcore: registered new interface driver ums-isd200
  117. usbcore: registered new interface driver ums-jumpshot
  118. usbcore: registered new interface driver ums-karma
  119. usbcore: registered new interface driver ums-onetouch
  120. usbcore: registered new interface driver ums-sddr09
  121. usbcore: registered new interface driver ums-sddr55
  122. usbcore: registered new interface driver ums-usbat
  123. usbcore: registered new interface driver usbserial
  124. USB Serial support registered for generic
  125. usbcore: registered new interface driver usbserial_generic
  126. usbserial: USB Serial Driver core
  127. USB Serial support registered for aircable
  128. usbcore: registered new interface driver aircable
  129. USB Serial support registered for ark3116
  130. usbcore: registered new interface driver ark3116
  131. USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
  132. usbcore: registered new interface driver belkin
  133. belkin_sa: v1.2:USB Belkin Serial converter driver
  134. USB Serial support registered for ch341-uart
  135. usbcore: registered new interface driver ch341
  136. USB Serial support registered for cp210x
  137. usbcore: registered new interface driver cp210x
  138. cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
  139. USB Serial support registered for Reiner SCT Cyberjack USB card reader
  140. usbcore: registered new interface driver cyberjack
  141. cyberjack: v1.01 Matthias Bruestle
  142. cyberjack: REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver
  143. USB Serial support registered for DeLorme Earthmate USB
  144. USB Serial support registered for HID->COM RS232 Adapter
  145. USB Serial support registered for Nokia CA-42 V2 Adapter
  146. usbcore: registered new interface driver cypress
  147. cypress_m8: v1.09:Cypress USB to Serial Driver
  148. USB Serial support registered for Digi 2 port USB adapter
  149. USB Serial support registered for Digi 4 port USB adapter
  150. usbcore: registered new interface driver digi_acceleport
  151. digi_acceleport: v1.80.1.2:Digi AccelePort USB-2/USB-4 Serial Converter driver
  152. USB Serial support registered for Edgeport 2 port adapter
  153. USB Serial support registered for Edgeport 4 port adapter
  154. USB Serial support registered for Edgeport 8 port adapter
  155. USB Serial support registered for EPiC device
  156. usbcore: registered new interface driver io_edgeport
  157. io_edgeport: v2.7:Edgeport USB Serial Driver
  158. USB Serial support registered for Edgeport TI 1 port adapter
  159. USB Serial support registered for Edgeport TI 2 port adapter
  160. usbcore: registered new interface driver io_ti
  161. io_ti: v0.7mode043006:Edgeport USB Serial Driver
  162. USB Serial support registered for empeg
  163. usbcore: registered new interface driver empeg
  164. empeg: v1.2:USB Empeg Mark I/II Driver
  165. USB Serial support registered for FTDI USB Serial Device
  166. usbcore: registered new interface driver ftdi_sio
  167. ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver
  168. USB Serial support registered for funsoft
  169. usbcore: registered new interface driver funsoft
  170. USB Serial support registered for Garmin GPS usb/tty
  171. usbcore: registered new interface driver garmin_gps
  172. garmin_gps: v0.33:garmin gps driver
  173. USB Serial support registered for hp4X
  174. usbcore: registered new interface driver hp4X
  175. hp4x: v1.00:HP4x (48/49) Generic Serial driver
  176. USB Serial support registered for PocketPC PDA
  177. usbcore: registered new interface driver ipaq
  178. ipaq: v0.5:USB PocketPC PDA driver
  179. USB Serial support registered for IPWireless converter
  180. usbcore: registered new interface driver ipwtty
  181. ipw: v0.3:IPWireless tty driver
  182. USB Serial support registered for IR Dongle
  183. usbcore: registered new interface driver ir-usb
  184. ir_usb: v0.4:USB IR Dongle driver
  185. USB Serial support registered for iuu_phoenix
  186. usbcore: registered new interface driver iuu_phoenix
  187. iuu_phoenix: v0.11:Infinity USB Unlimited Phoenix driver
  188. USB Serial support registered for Keyspan - (without firmware)
  189. USB Serial support registered for Keyspan 1 port adapter
  190. USB Serial support registered for Keyspan 2 port adapter
  191. USB Serial support registered for Keyspan 4 port adapter
  192. usbcore: registered new interface driver keyspan
  193. keyspan: v1.1.5:Keyspan USB to Serial Converter Driver
  194. USB Serial support registered for Keyspan PDA
  195. USB Serial support registered for Keyspan PDA - (prerenumeration)
  196. USB Serial support registered for Xircom / Entregra PGS - (prerenumeration)
  197. usbcore: registered new interface driver keyspan_pda
  198. keyspan_pda: v1.1:USB Keyspan PDA Converter driver
  199. USB Serial support registered for KL5KUSB105D / PalmConnect
  200. usbcore: registered new interface driver kl5kusb105d
  201. kl5kusb105: v0.3a:KLSI KL5KUSB105 chipset USB->Serial Converter driver
  202. USB Serial support registered for KOBIL USB smart card terminal
  203. usbcore: registered new interface driver kobil
  204. kobil_sct: 21/05/2004:KOBIL USB Smart Card Terminal Driver (experimental)
  205. USB Serial support registered for MCT U232
  206. usbcore: registered new interface driver mct_u232
  207. mct_u232: z2.1:Magic Control Technology USB-RS232 converter driver
  208. USB Serial support registered for Moschip 2 port adapter
  209. mos7720: 1.0.0.4F:Moschip USB Serial Driver
  210. usbcore: registered new interface driver moschip7720
  211. USB Serial support registered for Moschip 7840/7820 USB Serial Driver
  212. mos7840: 1.3.2:Moschip 7840/7820 USB Serial Driver
  213. usbcore: registered new interface driver mos7840
  214. USB Serial support registered for moto-modem
  215. usbcore: registered new interface driver moto-modem
  216. USB Serial support registered for navman
  217. usbcore: registered new interface driver navman
  218. USB Serial support registered for ZyXEL - omni.net lcd plus usb
  219. usbcore: registered new interface driver omninet
  220. omninet: v1.1:USB ZyXEL omni.net LCD PLUS Driver
  221. USB Serial support registered for opticon
  222. usbcore: registered new interface driver opticon
  223. USB Serial support registered for GSM modem (1-port)
  224. usbcore: registered new interface driver option
  225. option: v0.7.2:USB Driver for GSM modems
  226. USB Serial support registered for oti6858
  227. usbcore: registered new interface driver oti6858
  228. USB Serial support registered for pl2303
  229. usbcore: registered new interface driver pl2303
  230. pl2303: Prolific PL2303 USB to serial adaptor driver
  231. USB Serial support registered for Qualcomm USB modem
  232. usbcore: registered new interface driver qcserial
  233. safe_serial: v0.0b:USB Safe Encapsulated Serial
  234. USB Serial support registered for safe_serial
  235. usbcore: registered new interface driver safe_serial
  236. USB Serial support registered for siemens_mpi
  237. usbcore: registered new interface driver siemens_mpi
  238. Driver for Siemens USB/MPI adapter
  239. Version 0.1 09/26/2005 Thomas Hergenhahn@web.de http://libnodave.sf.net
  240. USB Serial support registered for Sierra USB modem
  241. usbcore: registered new interface driver sierra
  242. sierra: v.1.3.8:USB Driver for Sierra Wireless USB modems
  243. USB Serial support registered for SPCP8x5
  244. usbcore: registered new interface driver spcp8x5
  245. spcp8x5: v0.04:SPCP8x5 USB to serial adaptor driver
  246. USB Serial support registered for symbol
  247. usbcore: registered new interface driver symbol
  248. USB Serial support registered for TI USB 3410 1 port adapter
  249. USB Serial support registered for TI USB 5052 2 port adapter
  250. usbcore: registered new interface driver ti_usb_3410_5052
  251. ti_usb_3410_5052: v0.9:TI USB 3410/5052 Serial Driver
  252. USB Serial support registered for Handspring Visor / Palm OS
  253. USB Serial support registered for Sony Clie 3.5
  254. USB Serial support registered for Sony Clie 5.0
  255. usbcore: registered new interface driver visor
  256. visor: USB HandSpring Visor / Palm OS driver
  257. USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
  258. USB Serial support registered for Connect Tech - WhiteHEAT
  259. usbcore: registered new interface driver whiteheat
  260. whiteheat: v2.0:USB ConnectTech WhiteHEAT driver
  261. mice: PS/2 mouse device common for all mice
  262. S3C24XX RTC, (c) 2004,2006 Simtec Electronics
  263. i2c /dev entries driver
  264. Linux video capture interface: v2.00
  265. gspca: main v2.7.0 registered
  266. usbcore: registered new interface driver conex
  267. conex: registered
  268. usbcore: registered new interface driver etoms
  269. etoms: registered
  270. usbcore: registered new interface driver finepix
  271. finepix: registered
  272. usbcore: registered new interface driver jeilinj
  273. jeilinj: registered
  274. usbcore: registered new interface driver mars
  275. mars: registered
  276. usbcore: registered new interface driver mr97310a
  277. mr97310a: registered
  278. usbcore: registered new interface driver ov519
  279. ov519: registered
  280. usbcore: registered new interface driver ov534
  281. ov534: registered
  282. usbcore: registered new interface driver pac207
  283. pac207: registered
  284. usbcore: registered new interface driver pac7311
  285. pac7311: registered
  286. usbcore: registered new interface driver sn9c20x
  287. sn9c20x: registered
  288. usbcore: registered new interface driver sonixb
  289. sonixb: registered
  290. usbcore: registered new interface driver sonixj
  291. sonixj: registered
  292. usbcore: registered new interface driver spca500
  293. spca500: registered
  294. usbcore: registered new interface driver spca501
  295. spca501: registered
  296. usbcore: registered new interface driver spca505
  297. spca505: registered
  298. usbcore: registered new interface driver spca506
  299. spca506: registered
  300. usbcore: registered new interface driver spca508
  301. spca508: registered
  302. usbcore: registered new interface driver spca561
  303. spca561: registered
  304. usbcore: registered new interface driver sq905
  305. sq905: registered
  306. usbcore: registered new interface driver sq905c
  307. sq905c: registered
  308. usbcore: registered new interface driver sunplus
  309. sunplus: registered
  310. usbcore: registered new interface driver stk014
  311. stk014: registered
  312. usbcore: registered new interface driver t613
  313. t613: registered
  314. usbcore: registered new interface driver tv8532
  315. tv8532: registered
  316. usbcore: registered new interface driver vc032x
  317. vc032x: registered
  318. usbcore: registered new interface driver zc3xx
  319. zc3xx: registered
  320. usbcore: registered new interface driver ALi m5602
  321. ALi m5602: registered
  322. usbcore: registered new interface driver STV06xx
  323. STV06xx: registered
  324. gspca_gl860: driver startup - version 0.9d10
  325. usbcore: registered new interface driver gspca_gl860
  326. gspca_gl860: driver registered
  327. usbcore: registered new interface driver uvcvideo
  328. USB Video Class driver (v0.1.0)
  329. S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
  330. s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
  331. usbcore: registered new interface driver usbhid
  332. usbhid: v2.6:USB HID core driver
  333. Advanced Linux Sound Architecture Driver Version 1.0.21.
  334. No device for DAI UDA134X
  335. No device for DAI s3c24xx-i2s
  336. ALSA device list:
  337.   No soundcards found.
  338. TCP cubic registered
  339. NET: Registered protocol family 17
  340. drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  341. yaffs: dev is 32505859 name is "mtdblock3"
  342. yaffs: passed flags ""
  343. yaffs: Attempting MTD mount on 31.3, "mtdblock3"
  344. block 208 is bad
  345. Partially written block 46 detected
  346. Partially written block 46 detected
  347. Partially written block 46 detected
  348. Partially written block 46 detected
  349. Partially written block 46 detected
  350. Partially written block 46 detected
  351. Partially written block 46 detected
  352. Partially written block 46 detected
  353. Partially written block 46 detected
  354. Partially written block 46 detected
  355. Partially written block 46 detected
  356. Partially written block 46 detected
  357. Partially written block 46 detected
  358. Partially written block 46 detected
  359. Partially written block 46 detected
  360. Partially written block 46 detected
  361. Partially written block 46 detected
  362. Partially written block 46 detected
  363. Partially written block 46 detected
  364. Partially written block 46 detected
  365. Partially written block 46 detected
  366. Partially written block 46 detected
  367. Partially written block 46 detected
  368. Partially written block 46 detected
  369. Partially written block 46 detected
  370. Partially written block 46 detected
  371. Partially written block 46 detected
  372. Partially written block 46 detected
  373. Partially written block 46 detected
  374. Partially written block 46 detected
  375. Partially written block 46 detected
  376. Partially written block 46 detected
  377. Partially written block 46 detected
  378. Partially written block 46 detected
  379. Partially written block 46 detected
  380. Partially written block 46 detected
  381. Partially written block 46 detected
  382. Partially written block 46 detected
  383. Partially written block 46 detected
  384. Partially written block 46 detected
  385. Partially written block 46 detected
  386. Partially written block 46 detected
  387. Partially written block 46 detected
  388. Partially written block 46 detected
  389. Partially written block 46 detected
  390. Partially written block 46 detected
  391. Partially written block 46 detected
  392. Partially written block 46 detected
  393. yaffs_read_super: isCheckpointed 0
  394. VFS: Mounted root (yaffs2 filesystem) on device 31:3.
  395. Freeing init memory: 116K
  396. ----------munt all----------------
  397. ***********************************************
  398. ****************Studying ARM*********************
  399. Kernel version:linux-2.6.29.1
  400. Student:Huang huahai
  401. Date:2009.10.1
  402. ***********************************************


  405. Please press Enter to activate this console.
  406. [root@MINI2440]#
重启开发板，此时开发板可以自启动并成功进入我们自己的文件系统！至此u-boot已经成功引导内核，内核成功启动文件系统。
下来实现nfs挂载文件系统，便于以后的学习和开发！！！



阅读(3352) | 评论(0) | 转发(1) |
0

上一篇：Linux-2.6.32在Mini2440上的移植（四）----DM9000网卡移植

下一篇：u-boot引导内核，nfs启动文件系统

给主人留下些什么吧！~~
关于我们 | 关于IT168 | 联系方式 | 广告合作 | 法律声明 | 免费注册

Copyright 2001-2010 ChinaUnix.net All Rights Reserved 北京皓辰网域网络信息技术有限公司. 版权所有

感谢所有关心和支持过ChinaUnix的朋友们

16024965号-6