Chinaunix首页 | 论坛 | 博客
  • 博客访问: 630518
  • 博文数量: 1008
  • 博客积分: 10
  • 博客等级: 民兵
  • 技术积分: 5175
  • 用 户 组: 普通用户
  • 注册时间: 2012-07-31 09:44
文章分类
文章存档

2012年(1008)

我的朋友

分类:

2012-07-31 10:51:10

/*********************************************************************************************
* File name: iic.c
* Author:  
* Descript:  iic source code.
* History:
*   
*********************************************************************************************/
/*------------------------------------------------------------------------------------------*/
/*          include files               */
/*------------------------------------------------------------------------------------------*/
#include "2410lib.h"
#include "iic_test.h"
/*------------------------------------------------------------------------------------------*/
/*          global variables              */
/*------------------------------------------------------------------------------------------*/
int f_nGetACK;
/*********************************************************************************************
* name:  iic_test
* func:  test iic
* para:  none
* ret:  none
* modify:
* comment:  
*********************************************************************************************/
void iic_test(void)
{
    UINT8T    szData[16];
//    UINT8T   szBuf[40];
    unsigned int  i;
 uart_printf("\n IIC Protocol Test Example, using AT24C04...\n");
    uart_printf(" Write char 0-f into AT24C04\n");
 f_nGetACK = 0;
    // Enable interrupt
 rINTMOD  = 0x0;
    ClearPending(BIT_IIC);
 rINTMSK &= ~BIT_IIC;
    pISR_IIC = (unsigned)iic_int_24c04;
 // Initialize iic
 rIICADD = 0x10;            // S3C2410X slave address
    rIICCON = 0xaf;            // Enable ACK, interrupt, SET IICCLK=MCLK/16
    rIICSTAT = 0x10;           // Enable TX/RX
 // Write 0 - 16 to 24C04
    for(i=0; i<16; i++)
    {
  iic_write_24c040(0xa0, i, i);
  uart_printf(" %d",i);
  delay(10);
 }
 
 // Clear array
    for(i=0; i<16; i++)
  szData[i]=0;
   
    // Read 16 byte from 24C04
    for(i=0; i<16; i++)
  iic_read_24c040(0xa0, i, &(szData[i]));
 // Printf read data
    uart_printf(" \nRead 16 bytes from AT24C04\n");
  for(i=0; i<16; i++)
    {/*
#ifdef BOARDTEST
  sprintf(szBuf," %2x ",szData[i]);
  if(i<8)
   Lcd_DspAscII6x8(194+10*i,170,0xec,szBuf);
  else
   Lcd_DspAscII6x8(194+10*(i-8),180,0xec,szBuf);
#endif
    */
     uart_printf(" %2x ", szData[i]);
 }
   
 rINTMSK |= BIT_IIC;
 uart_printf("\n end.\n");
}
/*********************************************************************************************
* name:  iic_write_24c040
* func:  write data to 24C040
* para:  unSlaveAddr --- input, chip slave address
*   unAddr  --- input, data address
*   ucData     --- input, data value
* ret:  none
* modify:
* comment:  
*********************************************************************************************/
void iic_write_24c040(UINT32T unSlaveAddr,UINT32T unAddr,UINT8T ucData)
{
 f_nGetACK = 0;
   
    // Send control byte
    rIICDS = unSlaveAddr;          // 0xa0
    rIICSTAT = 0xf0;           // Master Tx,Start
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
   
    //Send address
    rIICDS = unAddr;
    rIICCON = 0xaf;            // Resumes IIC operation.
   
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
   
    // Send data
    rIICDS = ucData;
    rIICCON = 0xaf;            // Resumes IIC operation.
   
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
   
    // End send
    rIICSTAT = 0xd0;           // Stop Master Tx condition
    rIICCON = 0xaf;            // Resumes IIC operation.
    delay(5);             // Wait until stop condtion is in effect.
}
 
/*********************************************************************************************
* name:  iic_read_24c040
* func:  read data from 24C040
* para:  unSlaveAddr --- input, chip slave address
*   unAddr  --- input, data address
*   pData     --- output, data pointer
* ret:  none
* modify:
* comment:  
*********************************************************************************************/
void iic_read_24c040(UINT32T unSlaveAddr,UINT32T unAddr,UINT8T *pData)
{
 char cRecvByte;
 
 f_nGetACK = 0;
    //Send control byte
    rIICDS = unSlaveAddr;          // 0xa0
    rIICSTAT = 0xf0;           // Master Tx,Start
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
    // Send address
    rIICDS = unAddr;
    rIICCON = 0xaf;            // Resumes IIC operation.
   
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
    //Send control byte
    rIICDS = unSlaveAddr;          // 0xa0
    rIICSTAT = 0xb0;           // Master Rx,Start
 rIICCON = 0xaf;            // Resumes IIC operation.  
 
    while(f_nGetACK == 0);          // Wait ACK
    f_nGetACK = 0;
   
    //Get data
    cRecvByte = rIICDS;
    rIICCON = 0x2f;
    delay(1);
   
    // Get data
    cRecvByte = rIICDS;
   
    // End receive
    rIICSTAT = 0x90;           // Stop Master Rx condition
 rIICCON = 0xaf;            // Resumes IIC operation.
 delay(5);             // Wait until stop condtion is in effect.
 
    *pData = cRecvByte;
}
/*********************************************************************************************
* name:  iic_int_24c04()
* func:  IIC interrupt handler
* para:  none
* ret:  none
* modify:
* comment:  
*********************************************************************************************/
void __irq iic_int_24c04(void)
{
    ClearPending(BIT_IIC);
 f_nGetACK = 1;
}
阅读(580) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~