文件系统挂载中出现的问题

Error -3 while decompressing!

c02321b4(757461136)->c3c79000(4096)

end_request: I/O error, dev mtdblock3, sector 912

Buffer I/O error on device mtdblock3, logical block 114

end_request: I/O error, dev mtdblock3, sector 912

Buffer I/O error on device mtdblock3, logical block 114

end_request: I/O error, dev mtdblock3, sector 920

Buffer I/O error on device mtdblock3, logical block 115

end_request: I/O error, dev mtdblock3, sector 920

Buffer I/O error on device mtdblock3, logical block 115

end_request: I/O error, dev mtdblock3, sector 912

Buffer I/O error on device mtdblock3, logical block 114

end_request: I/O error, dev mtdblock3, sector 920

Buffer I/O error on device mtdblock3, logical block 115

Error -3 while decompressing!

c02321e0(-468904)->c3c8e000(4096)

Kernel panic - not syncing: No init found.  Try passing init= option to kernel.

 

编译完内核并加载文件系统后出现以上信息，原以为是内核未设置好，最后发现是nand flash的坏块问题引起的，

解决方法vivi参数： param set linux_cmd_line "。。。root=/dev/mtdblock/3 。。。"

改为：param set linux_cmd_line "。。。root=/dev/mtdblock/4 。。"即将文件系统从新挂载在新的分区。

 

另外，用ifconfig设置Mac地址命令：

                        ifconfig eth0 hw ether xx：xx：xx：xx：xx：xx