The following traces the Linux boot sequence for ARM-based systems in the 2.6.18 kernel. It looks at just the earliest stages of the boot process, until the generic non-processor-specific start_kernel function is called. The line numbers of each statement are in parenthese at the end of the line; the kernel source itself can be conveniently browsed on the .
zImage decompression
- arch/arm/boot/compressed/head.S: start (108)
- First code executed, jumped to by the bootloader, at label "start" (108)
- save contents of registers r1 and r2 in r7 and r8 to save off architecture ID and atags pointer passed in by bootloader (118)
- execute arch-specific code (inserted at 146)
- arch/arm/boot/compressed/head-xscale.S or other arch-specific code file
- added to build in arch/arm/boot/compressed/Makefile
- linked into head.S by linker section declaration: .section “start”
- flush cache, turn off cache and MMU
- load registers with stored parameters (152)
- sp = stack pointer for decompression code (152)
- r4 = zreladdr = kernel entry point physical address
- check if running at link address, and fix up global offset table if not (196)
- zero decompression bss (205)
- call cache_on to turn on cache (218)
- defined at arch/arm/boot/compressed/head.S (320)
- call call_cache_fn to turn on cache as appropriate for processor variant
- defined at arch/arm/boot/compressed/head.S (505)
- walk through proc_types list (530) until find corresponding processor
- call cache-on function in list item corresponding to processor (511)
- for ARMv5tej core, cache_on function is __armv4_mmu_cache_on (417)
- call setup_mmu to set up initial page tables since MMU must be on for cache to be on (419)
- turn on cache and MMU (426)
- check to make sure won't overwrite image during decompression; assume not for this trace (232)
- call decompress_kernel to decompress kernel to RAM (277)
- branch to call_kernel (278)
- call cache_clean_flush to flush cache contents to RAM (484)
- call cache_off to turn cache off as expected by kernel initialization routines (485)
- jump to start of kernel in RAM (489)
- jump to address in r4 = zreladdr from previous load
- zreladdr = ZRELADDR = zreladdr-y
- zreladdr-y specified in arch/arm/mach-vx115/Makefile.boot
ARM-specific kernel code
- arch/arm/kernel/head.S: stext (72)
- call __lookup_processor_type (76)
- defined in arch/arm/kernel/head-common.S (146)
- search list of supported processor types __proc_info_begin (176)
- kernel may be built to support more than one processor type
- list of proc_info_list structs
- defined in arch/arm/mm/proc-arm926.S (467) and other corresponding proc-*.S files
- linked into list by section declaration: .section ".proc.info.init"
- return pointer to proc_info_list struct corresponding to processor if found, or loop in error if not
- call __lookup_machine_type (79)
- defined in arch/arm/kernel/head-common.S (194)
- search list of supported machines (boards)
- kernel may be built to support more than one board
- list of machine_desc structs
- machine_desc struct for boards defined in board-specific file vx115_vep.c
- linked into list by section declaration that's part of MACHINE_DESC macro
- return pointer to machine_desc struct corresponding to machine (board)
- call __create_page_tables to set up initial MMU tables (82)
- set lr to __enable_mmu, r13 to address of __switch_data (91, 93)
- lr and r13 used for jumps after the following calls
- __switch_data defined in arch/arm/kernel/head-common.S (15)
- call the __cpu_flush function pointer in the previously returned proc_info_list struct (94)
- offset is #PROCINFO_INITFUNC into struct
- this function is __arm926_setup for the ARM 926EJ-S, defined in arch/arm/mm/proc-arm926.S (392)
- initialize caches, writebuffer
- jump to lr, previously set to address of __enable_mmu
- __enable_mmu (147)
- set page table pointer (TTB) in MMU hardware so it knows where to start page-table walks (167)
- enable MMU so running with virtual addresses (185)
- jump to r13, previously set to address of __switch_data, whose first field is address of __mmap_switched
- __switch_data defined in arch/arm/kernel/head-common.S (15)
- arch/arm/kernel/head-common.S: __mmap_switched (35)
- copy data segment to RAM (39)
- zero BSS (45)
- branch to start_kernel (55)
Processor-independent kernel code
- init/main.c: start_kernel (456)
阅读(370) | 评论(0) | 转发(0) |