u-boot-2010.06在TQ2440上的移植<11>--支持USB下载

参考资料http://chxxxyg.blog.163.com/blog/static/1502811932010813115518537/

http://blog.chinaunix.net/u3/105764/showart_2144192.html

1。在drivers/usb/下面建立新目录

mkdir /drivers/usb/slave

拷贝那个chxxxyg给的源代码。

2。修改uboot根目录下的Makefeils，添加红色部分代码

LIBS += drivers/usb/musb/libusb_musb.a

LIBS += drivers/usb/slave/libusb_slave.a

LIBS += drivers/video/libvideo.a

 

3。修改lib_arm/board.c文件，添加红色部分代码,增加USB_SLAVE初始化函数。

 /* enable exceptions */
 enable_interrupts ();
/*>>>>>>>>>>>>>>>>>>>>>>>>>>>*/
#ifdef CONFIG_USB_DEVICE
usb_init_slave();
#endif
/*<<<<<<<<<<<<<<<<<<<<<<<<<<<*/

4。修改平台头文件，include/configs/smdk2440.h，添加红色部分

#define CONFIG_USB_DEVICE 1

#ifdef CONFIG_USB_DEVICE

#define CONFIG_USE_IRQ 1

#endif

//#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */

5。修改cpu/arm920t/s3c24x0/interrupts.c 文件，添加arch_interrupt_init函数定义

添加头文件 #include

添加 

int arch_interrupt_init (void)
{
    return 0;
}

6。修改arch/arm/cpu/arm920t/start.S，文件

#ifdef CONFIG_USE_IRQ
    
.align    5
    irq:
    //此处开始修改
    /*
        get_irq_stack
        irq_save_user_regs
        bl    do_irq
        irq_restore_user_regs
    */


    /* use IRQ for USB and DMA */
        sub    lr, lr, #4             @ the return address
        ldr    sp, IRQ_STACK_START     @ the stack for irq
        stmdb  sp!,   { r0-r12,lr }    @ save registers
        
        ldr    lr,    =int_return         @ set the return addr
        ldr    pc, =IRQ_Handle         @ call the isr
    int_return:
        ldmia  sp!,   { r0-r12,pc }^    @ return from interrupt
    //，修改结束

7。修改arch/arm/include/asm/arch-s3c24x0.h，文件

#else /*  little endian */

u8FUNC_ADDR_REG;

u8res1[3];

u8PWR_REG;

u8res2[3];

u8EP_INT_REG;

u8res3[15];

u8USB_INT_REG;

u8res4[3];

u8EP_INT_EN_REG;

u8res5[15];

u8USB_INT_EN_REG;

u8res6[3];

u8FRAME_NUM1_REG;

u8res7[3];

u8FRAME_NUM2_REG;

u8res8[3];

u8INDEX_REG;

u8res9[7];

u8MAXP_REG;

//u8res10[7];

u8res10[3];  //by cheny

u8EP0_CSR_IN_CSR1_REG;

u8res11[3];

u8IN_CSR2_REG;

//u8res12[3];

u8res12[7]; //by cheny

u8OUT_CSR1_REG;

//u8res13[7];

u8res13[3];//by cheny

u8OUT_CSR2_REG;

u8res14[3];

u8OUT_FIFO_CNT1_REG;

u8res15[3];

u8OUT_FIFO_CNT2_REG;

u8res16[3];

#endif /*  __BIG_ENDIAN */

u32res17[8]; //by cheny

struct s3c24x0_usb_dev_fifosfifo[5];

u32res18[11]; //by cheny

struct s3c24x0_usb_dev_dmasep1;//by cheny

struct s3c24x0_usb_dev_dmasep2; //by cheny

u8res19[16];//by cheny

struct s3c24x0_usb_dev_dmasep3; //by cheny

struct s3c24x0_usb_dev_dmasep4; //by cheny

//struct s3c24x0_usb_dev_dmasdma[5];

};

8。添加usbslave命令

在common目录下创建cmd_usbslave.c

#include

#include

#include

#ifdef CONFIG_USB_DEVICE

#ifdef CONFIG_USE_IRQ

    #define IRQ_STACK_START    (_armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4)

    #define FIQ_STACK_START    (IRQ_STACK_START - CONFIG_STACKSIZE_IRQ)

    #define FREE_RAM_END        (FIQ_STACK_START - CONFIG_STACKSIZE_FIQ - CONFIG_STACKSIZE)

    #define FREE_RAM_SIZE        (FREE_RAM_END - PHYS_SDRAM_1)

#else

    #define    FREE_RAM_END    (_armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4 - CONFIG_STACKSIZE)

    #define    FREE_RAM_SIZE    (FREE_RAM_END - PHYS_SDRAM_1)

#endif

int g_bUSBWait = 1;

u32 g_dwDownloadLen = 0;

extern int download_run;

extern volatile unsigned int dwUSBBufBase;

extern volatile unsigned int dwUSBBufSize;

extern __u32 usb_receive(char *buf, size_t len, unsigned int wait);

int do_usbslave (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])

{

    int i;

    size_t len = ~0UL;

    char buf[32];

    download_run = 1;

    switch (argc) {

        case 1:

        {

            break;

        }

        case 2:

        {

            g_bUSBWait = (int)simple_strtoul(argv[1], NULL, 16);

            break;

        }

        case 3:

        {

            g_bUSBWait = (int)simple_strtoul(argv[1], NULL, 16);

            load_addr = simple_strtoul(argv[2], NULL, 16);

            download_run = 0;

            break;

        }

        

        default:

        {

            printf ("Usage:\n%s\n", cmdtp->usage);

            return 1;

        }

    }

    dwUSBBufBase = load_addr;

    dwUSBBufSize = (FREE_RAM_SIZE&(~(0x80000-1)));

    if (g_bUSBWait)

        len = FREE_RAM_SIZE;

    g_dwDownloadLen = usb_receive(dwUSBBufBase, len, g_bUSBWait);

    sprintf(buf, "%X", g_dwDownloadLen);

    setenv("filesize", buf);

    

    return 0;

}

U_BOOT_CMD(

    usbslave,    3,    0,    do_usbslave,

    "usbslave - get file from host(PC)\n",

    "[wait] [loadAddress]\n"

    "\"wait\" is 0 or 1, 0 means for return immediately, not waits for the finish of transferring\n"

);

#endif

9。修改common/Makefile 

COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o

#+

COBJS-$(CONFIG_USB_DEVICE) += cmd_usbslave.o

#  -

10。修改USB_EN gpio设置

vi board/smdk2440/smdk2440.c

gpio->GPFCON = 0x000055AA;

gpio->GPFUP = 0x000000FF;

//gpio->GPGCON = 0xFF95FFBA;

//gpio->GPGUP = 0x0000FFFF;

gpio->GPGCON = 0xFD95FFBA; //USB_EN by cheny

gpio->GPGUP = 0x0000EFFF; //by cheny

gpio->GPGDAT &= ~(1 << 12);//disable USB Device by cheny

11。下载命令

usbslave 1 0x32000000

nand erase 0x200000 0x300000

nand write  0x32000000 0x200000 0x300000

 

 

 

文件:	slave.tar.bz2
大小:	15KB
下载:	下载

 

文件:	cmd_usbslave.rar
大小:	1KB
下载:	下载