Chinaunix首页 | 论坛 | 博客
  • 博客访问: 195523
  • 博文数量: 28
  • 博客积分: 197
  • 博客等级: 入伍新兵
  • 技术积分: 291
  • 用 户 组: 普通用户
  • 注册时间: 2012-04-18 14:10
文章分类

全部博文(28)

文章存档

2013年(11)

2012年(17)

分类:

2012-08-21 11:40:05

原文地址:linux设备调试信息输出 作者:tony3247

     linux设备驱动调试,我们在内核中看到内核使用dev_dbg来控制输出信息,这个函数的实质是调用printk(KERN_DEBUG )来输出打印信息。要打开这个开关需要下面两步。
     1、打开调试开关:你调试的文件中必然包含了,或者《linux/paltforam_device.h》,后者包含了前者,在包含此头文件之前,使用#define DEBUG 1 来打开调试开关:例如
#include
#include
#include
#include
#define DEBUG    1
#include

     在linux/device.h文件中:
#define dev_printk(level, dev, format, arg...)    \
    printk(level "%s %s: " format , dev_driver_string(dev) , (dev)->bus_id , ## arg)

#ifdef DEBUG
#define dev_dbg(dev, format, arg...)        \
    dev_printk(KERN_DEBUG , dev , format , ## arg)
#else
static inline int __attribute__ ((format (printf, 2, 3)))
dev_dbg(struct device * dev, const char * fmt, ...)
{
    return 0;
}
#endif
但是这个打开了之后,也不能顺利的输出信息,原因是printk有默认的信息级别。
    linux/kernel文件中
#define    KERN_EMERG    "<0>"    /* system is unusable            */
#define    KERN_ALERT    "<1>"    /* action must be taken immediately    */
#define    KERN_CRIT    "<2>"    /* critical conditions            */
#define    KERN_ERR    "<3>"    /* error conditions            */
#define    KERN_WARNING    "<4>"    /* warning conditions            */
#define    KERN_NOTICE    "<5>"    /* normal but significant condition    */
#define    KERN_INFO    "<6>"    /* informational            */
#define    KERN_DEBUG    "<7>"    /* debug-level messages            */
可以看到KERN_DEBUG是级别最低的。


2、修改文件kernel/printk文件
/* printk's without a loglevel use this.. */
#define DEFAULT_MESSAGE_LOGLEVEL 4 /* KERN_WARNING */

/* We show everything that is MORE important than this.. */
#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */
#define DEFAULT_CONSOLE_LOGLEVEL 8 /* anything MORE serious than KERN_DEBUG */
   其中
DEFAULT_CONSOLE_LOGLEVEL为终端console输出的最低级别,比这严重的都将输出。原来该值为7,则调试信息无法输出,修改为8则全部有输出。
阅读(1002) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~