Cisco 7600 FWSM 模块升级 IOS

Cisco 7600 FWSM 模块IOS

从2.3(1)升级到2.3(2) 步骤如下:

1>先进入 Active FWSM :

7600A# session slot 4 processes 1

User Access Verification

Password:

FWSM# show failover
Failover On
Failover unit Primary
Failover LAN fover Vlan 999
Unit Poll frequency 15 seconds, holdtime 45 seconds
Interface Poll frequency 15 seconds
Interface Policy 50%
Monitored Interfaces 2 of 250 maximum
Config sync: active
Last Failover at: 05:31:56 May 15 2005

        This host: Primary - Active
                Active time: 2310 (sec)
                Interface inside (192.168.1.254): rmal
                Interface dmz1 (0.0.0.0): Normal (Not-Monitored)
                Interface dmz2 (0.0.0.0): Normal (Not-Monitored)
                Interface dmz3 (0.0.0.0): Normal (Not-Monitored)
                Interface outside (193.1.1.254): Normal
        Other host: Secondary - Standby
                Active time: 0 (sec)
                Interface inside (192.168.1.253): Normal
                Interface dmz1 (0.0.0.0): Normal (Not-Monitored)
                Interface dmz2 (0.0.0.0): Normal (Not-Monitored)
                Interface dmz3 (0.0.0.0): Normal (Not-Monitored)
                Interface outside (193.1.1.253): Normal

2) FWSM 上升级ios

FWSM# copy tftp://192.168.1.10/c6svc-fwm-k9.2-3-1.bin  flash:image

copying tftp://192.168.1.10/c6svc-fwm-k9.2-3-1.bin to flash:image
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Received 5800448 bytes.
Erasing current image.This may take some time..
Writing 5799936 bytes of image.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Image installed.

FWSM# show version

FWSM Firewall Version 2.2(1)
FWSM Device Manager Version 4.1(1)

在7600A#hw-module module 4 reset

failover 会立即切换到7600B 上

3> 用同样方法升级7600B FWSM 模块上的2.3(2) IOS

升级过后:
FWSM# sh ver

FWSM Firewall Version 2.3(2)
FWSM Device Manager Version 4.1(1)

Compiled on Wed 06-Apr-05 13:08 by dalecki

FWSM up 21 mins 3 secs

Hardware:   WS-SVC-FWM-1, 1024 MB RAM, CPU Pentium III 1000 MHz
Flash  2.20    TOSHIBA THNCF128MBA @ 0xc321, 20MB

0: gb-ethernet0: irq 5
1: gb-ethernet1: irq 7
2: ethernet0: irq 11

Licensed Features:
Failover:           Enabled
VPN-DES:            Enabled
VPN-3DES:           Enabled
Maximum Interfaces: 256
Cut-through Proxy:  Enabled
Guards:             Enabled
URL-filtering:      Enabled
Throughput:         Unlimited
ISAKMP peers:       Unlimited
Security Contexts:  2

This machine has an Unrestricted (UR) license.

Serial Number: SFU02980036
Running Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration has not been modified since last system restart.