show redundancy Command
To display information about the active and standby (inactive) RPs, enter the show redundancy command as follows:
RP/0/RP0/CPU0:SHANHAI-CN21AA# show redundancy
Redundancy information for node 0/RP0/CPU0:
==========================================
Node 0/RP0/CPU0 is in ACTIVE role
Partner node (0/RP1/CPU0) is in STANDBY role
Standby node in 0/RP1/CPU0 is ready
Reload and boot info
----------------------
RP reloaded Wed Feb 15 13:58:32 2006: 1 week, 6 days, 22 hours, 49 minutes ago
Active node booted Wed Feb 15 13:58:32 2006: 1 week, 6 days, 22 hours, 49 minuto
Standby node boot Wed Feb 15 13:59:00 2006: 1 week, 6 days, 22 hours, 49 minuteo
Standby node last went not ready Wed Mar 1 07:40:00 2006: 5 hours, 8 minutes ao
Standby node last went ready Wed Mar 1 07:40:00 2006: 5 hours, 8 minutes ago
There have been 0 switch-overs since reload
阅读(1007) | 评论(0) | 转发(0) |
