实验说明:
RGIN: 0cm 0cm 0pt">R1和R2之间的平均吞吐量较低为了节省开支,我们决定修改与服务提供商签署的合同,将约定信息速率从1.544Mbit/s降低到19.2Mbit/s
实验过程:
第一步:预、
R1(config)#int s3/0
R1(config-if)#encapsulation frame-relay
R1(config-if)#no frame-relay inverse-arp
R1(config-if)#no sh
R1(config-if)#end
R1(config)#int s3/0.1 point-to-point
//配置为点到点子
R1(config-subif)#no sh
R1(config-subif)#ip ad 192.168.12.1 255.255.255.0
R1(config-subif)#no frame-relay inverse-arp
//关闭反向ARP
R1(config-subif)#frame-relay interface-dlci 102
R1(config-subif)#exit
R1(config)#router ospf 1
R1(config-router)#net 0.0.0.0 0.0.0.0 area 0
R1(config-router)#exit
R1(config)#int s3/0.2 point-to-point
R1(config-subif)#no sh
R1(config-subif)#no frame-relay inverse-arp
R1(config-subif)#ip ad 192.168.13.1 255.255.255.0
R1(config-subif)#no sh
R1(config-subif)#frame-relay interface-dlci 103
R2(config)#int s3/0
R2(config-if)#encapsulation frame-relay
R2(config-if)#ip ad 192.168.12.2 255.255.255.0
R2(config-if)#no sh
R2(config-if)#frame-relay map ip 192.168.12.1 201 broadcast
R2(config-if)#exit
R2(config)#router ospf 1
R2(config-router)#net 0.0.0.0 0.0.0.0 area 0
R2(config-router)#exit
R2(config)#int s3/0
R2(config-if)#ip ospf network point-to-point
R3(config)#int s3/0
R3(config-if)#no sh
R3(config-if)#encapsulation frame-relay
R3(config-if)#no frame-relay inverse-arp
R3(config-if)#ip ad 192.168.13.3 255.255.255.0
R3(config-if)#no sh
R3(config-if)#frame-relay map ip 192.168.13.1 301 b
R3(config-if)#exit
R3(config)#router ospf 1
R3(config-router)#net 0.0.0.0 0.0.0.0 area 0
R3(config-router)#exit
R3(config)#int s3/0
R3(config-if)#ip ospf network point-to-point
实验过程:
第一步在R1 进行整形
R1(config)#map-class frame-relay CIR
R1(config-map-class)#frame-relay traffic-rate 19200
R1(config-map-class)#exit
R1(config)#int s3/0
R1(config-if)#frame-relay traffic-shaping
R1(config-if)#int s3/0.1
R1(config-subif)#frame-relay class CIR
R1(config-subif)#int s3/0.2
R1(config-subif)#frame-relay class CIR
第二步:在R2上进行流量整形。
R2(config)#map-class frame-relay CIR
R2(config-map-class)#frame-relay traffic-rate 19200
R2(config-map-class)#exit
R2(config)#int s3/0
R2(config-if)#frame-relay class CIR
第三步:查看更为详细的流量整流的统计结果
R1#show frame pvc 102
PVC Statistics for interface Serial3/0 (Frame Relay DTE)
DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial3/0.1
input pkts 0
output pkts 0
in bytes 0
out bytes 0
dropped pkts 0
in pkts dropped 0
out pkts dropped 0
out bytes dropped 0
in FECN pkts 0
in BECN pkts 0
out FECN pkts 0
out BECN pkts 0
in DE pkts 0
out DE pkts 0
out bcast pkts 0
out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:50:40, last time pvc status changed 00:50:40
cir 19200
bc 19200
be 0
byte limit 300
interval 125
mincir 9600
byte increment 300
Adaptive Shaping none
pkts 0
bytes 0
pkts delayed 0
bytes delayed 0
shaping inactive
traffic shaping drops 0
Queueing strategy: fifo
Output queue 0/40, 0 drop, 0 dequeued
R2#show frame pvc 201
PVC Statistics for interface Serial3/0 (Frame Relay DTE)
DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = DeleteD, INTERFACE = Serial3/0
input pkts 0
output pkts 0
in bytes 0
out bytes 0
dropped pkts 0
in pkts dropped 0
out pkts dropped 0
out bytes dropped 0
in FECN pkts 0
in BECN pkts 0
out FECN pkts 0
out BECN pkts 0
in DE pkts 0
out DE pkts 0
out bcast pkts 0
out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:49:50, last time pvc status changed 00:49:37
阅读(794) | 评论(0) | 转发(1) |