分类： 系统运维
2012-08-10 13:57:28
To configure primary ACS server, complete se steps:
On the primary ACS server, open the Cisco Secure ACS user interface.
The Cisco Secure ACS interface appears.
In the left pane, click the Interface Configuration button.
The Interface Configuration page appears.
Click the Advanced Options link.
The Advanced Options page appears.
On the Advanced Options page, check the ACS internal database Replication check box, and then click Submit.
In the left pane, click the Network Configuration button.
The Network Configuration page appears.
In the AAA Servers area, click Add Entry in order to add a secondary ACS server.
The Add AAA Server page appears.
Enter values for the secondary ACS server, and then click Submit + Apply.
In the left pane, click the System Configuration button.
The System Configuration page appears.
Click the ACS Internal Database Replication link.
The Database Replication Setup page appears.
In the Replication Components area, check the Send check box for the components that you want to replicate to the secondary ACS server.
In the Outbound Replication Scheduling area, click the Manually radio button.
Note: If you prefer, you can schedule outbound replication to occur at timed intervals.
In the Outbound Replication Partners area, select from the AAA
Servers list the server that you added on the Add AAA Server page, and
then click the right arrow button () in order to move the server to the Replication list.
Leave the default values for the settings listed in the Inbound Replication and Replication Settings areas.
Click Submit.
To configure the secondary ACS server, complete these steps:
On the secondary server, open the Cisco Secure ACS user interface.
The Cisco Secure ACS interface appears.
In the left pane, click the Interface Configuration button.
The Interface Configuration page appears.
Click the Advanced Options link.
The Advanced Options page appears.
On the Advanced Options page, check the ACS internal database Replication check box, and then click Submit.
In the left pane, click the Network Configuration button.
The Network Configuration page appears.
In the AAA Servers area, click Add Entry in order to add a primary ACS server.
The Add AAA Server page appears.
Enter values for the primary ACS server, and then click Submit + Apply.
Note: The key for the primary and secondary server must be the same.
In the left pane, click the System Configuration button.
The System Configuration page appears.
On the System Configuration page, click the ACS Internal Database Replication link.
The Database Replication Setup page appears.
In the Replication Components area, check the Receive check box for the components that you want to replicate to the primary ACS server.
Note: The components you check for the primary server must match the components you check for the secondary server.
In the Outbound Replication Scheduling area, click the Manually radio button.
Note: In the Outbound Replication Partners area, leave the Replication list blank. Because the secondary server receives database components, you do not need to add a primary server to the Replication list.
In the Inbound Replication area, choose the primary AAA server from the Accept replication from drop-down menu.
In the Replication Settings area, leave the default setting for this value.
Click Submit.
This procedure applies only to .
To invoke database replication through Cisco Secure ACS, complete these steps:
On the primary ACS server, click the System Configuration button located in the left pane.
The System Configuration page appears.
Click the ACS Internal Database Replication link.
The Database Replication Setup page appears.
Click the Replicate Now button.
Verify the configuration. For details about how to verify your configuration, see Verify the Configuration.
