一、知识准备
HPUX 11.23与11.22版本配置根盘镜像的最大的不同:
1. 新增加了HPSP分区;
11.22系统根盘只划分了两个分区EFI/HP-UX，在11.23系统中，划分了3个分区，分别为EFI/HP-UX/HPSP.相应在使用idisk命令划分硬盘分区时使用的/tmp/partitionfile 文件中的内容也做了相应调整.
2. EFI分区大小从原先的100M，增加到500M
二、实验目的
对一台HP rx8640机器的2号分区根盘(146GB)镜像；
三、操作过程
1. From HPUX, use vgdisplay to identify the disk that is in vg00. Use ioscan to find the spare disk.
# vgdisplay -v --> vg00 is on /dev/dsk/c0t6d0s2 vg00卷组中只有一个盘分区c0t6d0s2
# ioscan -efunC disk --> c2t6d0 可以看到另一个磁盘和光驱
Class I H/W Path Driver S/W State H/W Type Description
========================================================================
disk 1 0/0/0/2/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c0t6d0 /dev/rdsk/c0t6d0
/dev/dsk/c0t6d0s1 /dev/rdsk/c0t6d0s1
/dev/dsk/c0t6d0s2 /dev/rdsk/c0t6d0s2
/dev/dsk/c0t6d0s3 /dev/rdsk/c0t6d0s3
Acpi(HWP0002,PNP0A03,0)/Pci(2|0)/Scsi(Pun6,Lun0)/HD(Part1,Sig0E481F42-F04C-11DC-8002-D6217B60E588)/\EFI\HPUX\HPUX.EFI
disk 0 0/0/0/2/1.2.0 sdisk CLAIMED DEVICE Optiarc DVD RW AD-5170A
/dev/dsk/c1t2d0 /dev/rdsk/c1t2d0
disk 2 0/0/0/3/0.6.0 sdisk CLAIMED DEVICE HP 146 GST3146855LC
/dev/dsk/c2t6d0 /dev/rdsk/c2t6d0
2. Create the system, OS, and service partitions.
# vi /tmp/partitionfile 建一个临时文件输入以下内容，名字随便
3 分3个区
EFI 500MB 最上面讲到了11.23的默认大小
HPUX 100% 剩余所有空间
HPSP 400MB 应该是预留替换坏扇区的空间吧！
# idisk -wf /tmp/partitionfile /dev/rdsk/c2t6d0 -w写（默认只读）-f来自于文件
idisk version: 1.31
********************** WARNING ***********************
If you continue you may destroy all data on this disk.
Do you wish to continue(yes/no)? yes
3. Create device files needed for the new partitions.
# insf -eC disk 创建磁盘分区表文件（重启自动创建）
insf: Installing special files for sdisk instance 1 address 0/0/0/2/0.6.0
insf: Installing special files for sdisk instance 0 address 0/0/0/2/1.2.0
insf: Installing special files for sdisk instance 2 address 0/0/0/3/0.6.0
insf: Installing special files for sdisk instance 3 address 0/0/12/1/0/4/1.0.0
insf: Installing special files for sdisk instance 4 address 0/0/12/1/0/4/1.1.0
insf: Installing special files for sdisk instance 5 address 0/0/12/1/0/4/1.2.0
insf: Installing special files for sdisk instance 6 address 0/0/12/1/0/4/1.3.0
insf: Installing special files for sdisk instance 7 address 0/0/14/1/0/4/1.0.0
insf: Installing special files for sdisk instance 8 address 0/0/14/1/0/4/1.1.0
insf: Installing special files for sdisk instance 9 address 0/0/14/1/0/4/1.2.0
insf: Installing special files for sdisk instance 10 address 0/0/14/1/0/4/1.3.0
4. Verify the partition table.
# idisk /dev/rdsk/c2t6d0 查看硬盘c2t6d0信息
idisk version: 1.32
EFI Primary Header:
Signature = EFI PART
Revision = 0x10000
HeaderSize = 0x5c
HeaderCRC32 = 0xe51d545d
MyLbaLo = 0x1
MyLbaHi = 0x0
AlternateLbaLo = 0x1117732f
AlternateLbaHi = 0x0
FirstUsableLbaLo = 0x22
FirstUsableLbaHi = 0x0
LastUsableLbaLo = 0x1117730c
LastUsableLbaHi = 0x0
Disk GUID = 711f04da-2190-11dd-8001-d6217b60e588
PartitionEntryLbaLo = 0x2
PartitionEntryLbaHi = 0x0
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0x280b786c
Primary Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 711f066a-2190-11dd-8002-d6217b60e588
Starting Lba Lo = 0x22
Starting Lba Hi = 0x0
Ending Lba Lo = 0xfa021
Ending Lba Hi = 0x0
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000
Unique Partition GUID = 711f0688-2190-11dd-8003-d6217b60e588
Starting Lba Lo = 0xfa022
Starting Lba Hi = 0x0
Ending Lba Lo = 0x110af30b
Ending Lba Hi = 0x0
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000
Unique Partition GUID = 711f06a6-2190-11dd-8004-d6217b60e588
Starting Lba Lo = 0x110af30c
Starting Lba Hi = 0x0
Ending Lba Lo = 0x1117730b
Ending Lba Hi = 0x0
EFI Alternate Header:
Signature = EFI PART
Revision = 0x10000
HeaderSize = 0x5c
HeaderCRC32 = 0xac871e6f
MyLbaLo = 0x1117732f
MyLbaHi = 0x0
AlternateLbaLo = 0x1
AlternateLbaHi = 0x0
FirstUsableLbaLo = 0x22
FirstUsableLbaHi = 0x0
LastUsableLbaLo = 0x1117730c
LastUsableLbaHi = 0x0
Disk GUID = 711f04da-2190-11dd-8001-d6217b60e588
PartitionEntryLbaLo = 0x1117730e
PartitionEntryLbaHi = 0x0
NumberOfPartitionEntries = 0xc
SizeOfPartitionEntry = 0x80
PartitionEntryArrayCRC32 = 0x280b786c
Alternate Partition Table (in 512 byte blocks):
Partition 1 (EFI):
Partition Type GUID = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
Unique Partition GUID = 711f066a-2190-11dd-8002-d6217b60e588
Starting Lba Lo = 0x22
Starting Lba Hi = 0x0
Ending Lba Lo = 0xfa021
Ending Lba Hi = 0x0
Partition 2 (HP-UX):
Partition Type GUID = 75894c1e-3aeb-11d3-b7c1-7b03a0000000
Unique Partition GUID = 711f0688-2190-11dd-8003-d6217b60e588
Starting Lba Lo = 0xfa022
Starting Lba Hi = 0x0
Ending Lba Lo = 0x110af30b
Ending Lba Hi = 0x0
Partition 3 (HPSP):
Partition Type GUID = e2a1e728-32e3-11d6-a682-7b03a0000000
Unique Partition GUID = 711f06a6-2190-11dd-8004-d6217b60e588
Starting Lba Lo = 0x110af30c
Starting Lba Hi = 0x0
Ending Lba Lo = 0x1117730b
Ending Lba Hi = 0x0
Legacy MBR (MBR Signatures in little endian):
MBR Signature = 0x6c041f71
Protective MBR
5. Verify that the device files were created properly.
# ioscan -efnC disk --> c2t6d0 is 0/0/0/3/0.6.0
6. Populate the /efi/hpux/ directory in the new EFI system partition.
# mkboot -e -l /dev/rdsk/c2t6d0
7. Change the auto file for the mirror to boot without quorum.
NOTE: Using "s1"
# echo "boot vmunix -lq" > /tmp/AUTO.lq
# efi_cp -d /dev/rdsk/c0t6d0s1 /tmp/AUTO.lq /EFI/HPUX/AUTO -->原作者漏写了
# efi_cp -d /dev/rdsk/c2t6d0s1 /tmp/AUTO.lq /EFI/HPUX/AUTO
NOTE: We assume that if we boot from the primary, the mirror is fully
functional and therefore we don't need to override quorum. Your site might
require that both disks override quorum.
8. Verify the contents of the auto file on the primary and the mirror.
NOTE: Using "s1"
# efi_cp -d /dev/rdsk/c0t6d0s1 -u /EFI/HPUX/AUTO /tmp/AUTO.pri
# efi_cp -d /dev/rdsk/c2t6d0s1 -u /EFI/HPUX/AUTO /tmp/AUTO.alt
# cat /tmp/AUTO.pri
boot vmunix -lq -------------------->修改后
# cat /tmp/AUTO.alt
boot vmunix -lq
9. Add the new partition to vg00.
NOTE: Using "s2"
# pvcreate -fB /dev/rdsk/c2t6d0s2 格式化
Physical volume "/dev/rdsk/c2t6d0s2" has been successfully created.
# vgextend vg00 /dev/dsk/c2t6d0s2 添加盘到vg00卷
Volume group "vg00" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
10. Mirror all logical volumes in vg00.
NOTE: Using "s2"
#for I in 1 2 3 4 5 6 7 8
>do
>lvextend -m l /dev/vg00/lvol$I /dev/dsk/c2t6d0s2
>done
# lvextend -m 1 /dev/vg00/lvol1 /dev/dsk/c2t6d0s2 镜像（数据拷贝）
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol1" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol2 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol2" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol3 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol3" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol4 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol4" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol5 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol5" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol6 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol6" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol7 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol7" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
# lvextend -m 1 /dev/vg00/lvol8 /dev/dsk/c2t6d0s2
The newly allocated mirrors are now being synchronized. This operation will
take some time. Please wait ....
Logical volume "/dev/vg00/lvol8" has been successfully extended.
Volume Group configuration for /dev/vg00 has been saved in /etc/lvmconf/vg00.conf
11. Add the new disk to /stand/bootconf.
NOTE: Using "s2"
# vi /stand/bootconf
l /dev/dsk/c0t6d0s2
l /dev/dsk/c2t6d0s2
12. Verify that the new disk was added to vg00, and the lv's are in sync.
# vgdisplay -v vg00
--- Volume groups ---
VG Name /dev/vg00
VG Write Access read/write
VG Status available
Max LV 255
Cur LV 8
Open LV 8
Max PV 16
Cur PV 2
Act PV 2
Max PE per PV 4356
VGDA 4
PE Size (Mbytes) 32
Total PE 8692
Alloc PE 2330
Free PE 6362
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
--- Logical volumes ---
LV Name /dev/vg00/lvol1
LV Status available/syncd
LV Size (Mbytes) 1792
Current LE 56
Allocated PE 112
Used PV 2
LV Name /dev/vg00/lvol2
LV Status available/syncd
LV Size (Mbytes) 8192
Current LE 256
Allocated PE 512
Used PV 2
LV Name /dev/vg00/lvol3
LV Status available/syncd
LV Size (Mbytes) 992
Current LE 31
Allocated PE 62
Used PV 2
LV Name /dev/vg00/lvol4
LV Status available/syncd
LV Size (Mbytes) 512
Current LE 16
Allocated PE 32
Used PV 2
LV Name /dev/vg00/lvol5
LV Status available/syncd
LV Size (Mbytes) 128
Current LE 4
Allocated PE 8
Used PV 2
LV Name /dev/vg00/lvol6
LV Status available/syncd
LV Size (Mbytes) 9184
Current LE 287
Allocated PE 574
Used PV 2
LV Name /dev/vg00/lvol7
LV Status available/syncd
LV Size (Mbytes) 7776
Current LE 243
Allocated PE 486
Used PV 2
LV Name /dev/vg00/lvol8
LV Status available/syncd
LV Size (Mbytes) 8704
Current LE 272
Allocated PE 544
Used PV 2
--- Physical volumes ---
PV Name /dev/dsk/c0t6d0s2
PV Status available
Total PE 4346
Free PE 3181
Autoswitch On
Proactive Polling On
PV Name /dev/dsk/c2t6d0s2
PV Status available
Total PE 4346
Free PE 3181
Autoswitch On
Proactive Polling On
13. Verify that the BDRA was updated properly. Take note of the HW paths for
step 14.
# lvlnboot -v
Boot Definitions for Volume Group /dev/vg00:
Physical Volumes belonging in Root Volume Group:
/dev/dsk/c0t6d0s2 (0/0/0/2/0.6.0) -- Boot Disk
/dev/dsk/c2t6d0s2 (0/0/0/3/0.6.0) -- Boot Disk
Boot: lvol1 on: /dev/dsk/c0t6d0s2
/dev/dsk/c2t6d0s2
Root: lvol3 on: /dev/dsk/c0t6d0s2
/dev/dsk/c2t6d0s2
Swap: lvol2 on: /dev/dsk/c0t6d0s2
/dev/dsk/c2t6d0s2
Dump: lvol2 on: /dev/dsk/c0t6d0s2, 0
14. Add EFI primary and high availability boot path menu entries.
# setboot -p 0/0/0/2/0.6.0
# setboot -h 0/0/0/3/0.6.0
# setboot -b on
15. Verify that the primary and mirror boot paths are configured properly.
# setboot
Primary bootpath : 0/0/0/2/0.6.0
HA Alternate bootpath : 0/0/0/3/0.6.0
Alternate bootpath : 0/0/0/1/0
Autoboot is ON (enabled)
16. Test the new mirror by booting off of it.
# cd /
# shutdown -ry 0
SHUTDOWN PROGRAM
05/14/08 17:19:51 EAT
Broadcast Message from root (console) Wed May 14 17:19:51...SYSTEM BEING BROUGHT DOWN NOW ! ! !
# grep "Boot device" /var/adm/syslog/syslog.log
vmunix: Boot device's HP-UX HW path is: 0/0/0/2/0.6.0
17. Change the boot sequence in order to boot from mirror disk /dev/dsk/c2t6d0:
# setboot -p 0/0/0/3/0.6.0
# setboot -h 0/0/0/2/0.6.0
# setboot -b on
# setboot
Primary bootpath : 0/0/0/3/0.6.0
HA Alternate bootpath : 0/0/0/2/0.6.0
Alternate bootpath : 0/0/0/1/0
# cd /
# shutdown -ry 0
18. Verify which disk/kernel you booted from.
# grep "Boot device" /var/adm/syslog/syslog.log
vmunix: Boot device's HP-UX HW path is: 0/0/0/3/0.6.0
over
阅读(4129) | 评论(0) | 转发(1) |
