2012年(464)
分类: Delphi
2012-07-25 11:00:06
Tesab Engineering has launched a new tracked
in the shape of the 1200TC that the company says completes its range of crushing
and screening equipment. The new machine features transport dimensions of 3.8 m
(12.5 ft) tall by 17.5 m (57.4 ft) long and 3 m (9.9 ft) wide, and weighs in at
45 tonnes.
According to the company, the 1.2 m diameter cone crusher unit is
a proven design that has established itself in static applications in
Scandinavia and Australasia. It features a large opening that can accept up to
250 mm feed size and has a high reduction ratio of up to 16:1. Four sizes of
concaves are available with a shared common mantle size and the closed-side
setting of the cone can be adjusted while crushing is underway.
The boom
development has been assisted by the high level of expertise that Palfinger has
accrued with aluminium - aluminium booms are only mounted on the 3.5t chassis.
Palfinger has established an "Aluminium Competence Centre" at its plant where
the company has developed high level skills in aluminium processing and
welding.
"Customers are fully confident in the strength of the aluminium
booms," says Mr Kulawik, "which have the additional benefit of not
corroding."
Older standard driving licenses in Germany and other parts of
Europe such as the UK still allow the holder to drive a vehicle up to 7.5t so
the self drive rental market for this size of vehicle is still active. At Bauma
next year - 2013 - Palfinger Platforms plans to show more developments in the
7.5t class and a very big machine on a 5-axle chassis - although not, Access
International was told, anything over 100m working height.
The 1200TC is
intended for applications such as hard rock quarrying, closed circuit crushing
with screening plant and concrete recycling. Safety features include a metal
detector system with automatic clearance design on the feed conveyor and a large
hydraulic accumulator to protect against tramp metal.
T130X ultrafine mill
with innovative design is a new-type grinding mill evolving from the original
patented product – TGM Super Pressure Trapezium Mill based on market research,
feedbacks and suggestions of customers both at home and abroad.
High tensile
steels are still used on the larger booms such as the new P 300 KS, which has
been designed for use in areas where conditions are cramped. It is configured to
bring maximum manoeuvrability and comfort to the 7.5t class because of the
counter slewing
system. It has a 30m working height and 20.5m outreach, maximum load capacity is
350kg.