Excellent simple design portable crusher in need

Excellent simple design portable crusher in need

HONGXING offers a wide range of rockbreaker systems suitable for raking and breaking in both stationary and portable crushing plants. The design of the BT series of hydraulic breakers produces stable high-speed percussion, and exceptional value and durability for all construction, demolition, and rockbreaking requirements.
Jaw crushers are mainly used as . Their primary purpose is always to produce material that may be transported by s for the subsequent crushing stages. The crushing takes spot in between a fixed and moving jaw which can be mounted on a pitman, and its movement it set up by the motion made from the eccentric shaft in the best of the pitman.

HONGXING’s MBS series of portable rockbreakers offer an on-plant, road to operations, permanent solution to portable and mobile crushing applications where safety and productivity are essential.
A toggle plate positioned in the bottom of the moving jaw can be a put on plate that takes the momentum in the moving jaw. Material to become broken enters by means of the inlet opening and, below gravity, moves among the jaws, gets compressed and lastly fractures as the material, now also receiving extra pressure from fresh boulders above, is forced by means of an ever-reducing gap. The closed side setting at the really bottom of moving and fixed jaw dies will decide the size of finish item leaving the crusher outlet.

HONGXING offers a full line of rockbreaker systems suited for the soft-medium rock crushing applications. These systems feature a wide range of working lengths allowing the rockbreaker to rake and break materials, while maintaining a constant flow of production through the crusher.
Specifically designed for recycling and light aggregate applications, these systems mount on primary or jaw crushing plants. They provide a safe and efficient way of handling oversize material as it is fed to the crusher.
As for , these hammers are fixed to a rotor that forces the rocks to collide with internal put on plates on the swing beams. These particles are additional crushed as rock-on-rock collisions occur, resulting inside a fine, high-quality, shaped end item. The closed side setting may be the distance among the lowest point of the lower swing beam and also the hammers. This gap will decide the size from the end material becoming created.
For the larger stationary crushing plants, HONGXING has designed and developed the ESX series rockbreaker system. This system is used in applications where extremely hard rock is present or a large coverage area is required. It can be used for material handling applications.