2012年（464）
分类： Delphi
2012-07-06 12:19:49
R-type milling machine is made up of the host unit structure, analysis of
pipeline installation, blower, hoist, electromagnetic Vibrating Feeder, electric
motor control and other components. According to users' needs, it can be fitted
with a hard material broken machine. Materials needs crushing size, the
materials hoist will be sent to storage hopper, to be expected by the vibrating
feeder uniform for the mainframe into Raymond Mill grinding room. After grinding
the powder material, we blow the circulating air with blower into the analysis,
which was conducted by election. Then the ore material will go through coarse
grinding to re-grinding, and finally becomes qualified powder. The finished
products, which is refined, discharges from pipe.
The westerbeke 38300 is a
heat exchanger used as an accessory in marine parts, and westerbeke 45528 is
another type of heat exchanger designed for high profile heat transfer, that is,
these can resist high heat variations. These are made up of cupro nickel that is
meant to withstand heat. Both of them are different in their designs depending
on the place where the device is supposed to be placed.
Another heat exchange device offered is the universal 299818, this device has
got one port at the top and the other at the bottom in order to enable the
coolant to flow from one port to the other port. The whole device is designed in
such a way that there is a minimum or no heat loss and there are enough margins
for the degradation etc., that may arise due to the flow of the hot liquid or
heat etc., and this is done by maintaining the thickness of the tube.
Raymond
Mill unit structure features:
First, three-dimensional structure, small
footprint, turnkey highly refined powder expected from the block of independent
self-production system.
2, the refined powder fineness of uniform rate of 99%
on screen, it is difficult to other milling equipment available.
3, the Drive
installation is in confined pulley and gear box, transmission smooth, reliable
operation.
4, the important components are used quality steel, wear-resistant
performance, the whole line is high wear resistance, reliable operation.
5,
the electrical system is centralized control, milling plant can be realized no
one basic operations and maintenance.
The is the
key equipment for grinding after the crushing process, which is widely used in
the manufacture industries, such as cement, silicate, new building material,
refractory material, fertilizer, ferrous metal, nonferrous metal and glass
ceramics and can be used for the dry and wet grinding for all kinds of ores and
other grind-able materials.
