Selective stone crushing to improves efficiency

Selective stone crushing to improves efficiency

Red Star compound crusher, a new type of fine crushing, coarse grinding crusher, is produced by experienced engineers in Red Star Mining Machinery Company, Henan. According to practical situation and users' demands, Red Star engineers combined advanced technology of similar products at home and abroad, optimized main technical parameters and promoted structure features. Compound crusher integrates and into one, which is large output, high efficiency, big crushing ratio, less wear, low energy consumption, good sealing, stable operation and convenient maintenance. When used for crushing limestone, coal, gangue and cement clinker in construction industry, compound crusher is obviously able to reduce grinded particle size and improve machine productivity. Compound crusher is in no way an ideal energy saving crusher equipment.

Notes in use of compound crusher

Crushing force is directly related to the stone block crushing effect. Crushing force that is too small, the material cannot be broken. If broken force is too large, it not only exceeds the strength limit of the materials linked to the grain, but also makes things crystal itself as compromised. This is a waste of energy, and causing unwanted pieces. To this end, as for each item, materials should be selected in advance a suitable crushing force value, so that materials can be broken within crushing limits without damaging Crystal itself. That can lead to the implementation of selective broken.

Work features of compound crusher

(1) Structure is simple and reasonable, and low running costs. Using the Principles of stone-stone, the wearing is small.
(2) High breaking rate and energy-saving.
(3) It has fine, coarse grinding capabilities.
(4) It is little influenced by moisture content of materials, moisture up to about 8%.
(5) Operation noise is lower than 75 decibels (DB class), less dust.

(6) It is suitable for crushing hard and super hard materials.

(7) The product is cubic shape, large stacking density. And iron contamination is minimal.
(8) Liner wear of the impeller is small, convenient in maintenance

Magnetic separation of the finished product after the tablets into the selected works of mine ore bucket collection for the finished product, have been left of the gangue by tailings from the mouth at the end of this magnetic separation processes. As a result of the gangue in the ore was abandoned, so to make ore grade improved.
The Magnetic Separator can separate raw materials with different magnetic rigidities. The machine works under the magnetic force and machine force.
Magnetic Separators are designed to recover ferromagnetic materials. The separators are available in designs and sizes to provide solutions for all applications.