2012年(464)
分类: Delphi
2012-06-20 14:40:02
We can see that it is the most economical and thorough way to process waste
by s. What's more, because the new type of dry process has replaced the vertical kiln cement production line, it
has provided better opportunity for this method. In addition, America and Europe
refer to waste as the secondary fuel. It is because the flammable waste can
replace some fuels to decrease the fuel demand in cement industry, which saves
the primary fuel and decreases the discharging of some waste air like CO2.
As
far as its replacement function concerned, using s to burn
waste is a comprehensive project to protect environment and
resource.
Although there are much difficulty and many problems for this
method, its potential application is huge. Now we advocate using recycle
resource and building economical society. This method must be a spot in the
development of the industry and will bring us much good social and economic
benefit.
Recently, the cement rotary kilns are most often used to dispose of
waste. In rotary kilns, waste is burnt and disposed of, which has made much
success around the world. This way is very good because it is economical,
harmless and can prevent from secondary pollution.
Rotary kiln is usually
known as rotatory dryer,handling by carrying it into direct contact with a
heated gas. The dryer is made from a huge, rotating cylindrical tube.
Rotary
kiln is handling by bringing it into direct contact having a heated gas. The
kiln is created from a huge, rotating cylindrical tube.The dryer slopes somewhat
so that the release end is leaner compared to materials feed end so that you can
convey the material by way of the dryer under.
Firstly, the inner temperature
in the cement rotary kiln is very high.
Secondly, the smoke can be kept
inside of the rotary kiln for a long time. The smoke with the temperature of
1100℃ can last for 4 seconds. The materials inside of the kiln keep suspending
and rolling, which is useful to burn the waste sufficiently.
Finally, the
flammable parts of the waste can be used as the fuel burnt by clinker. After
they are burnt sufficiently, they will be decomposed into harmless air. The harm
powder contained in the smoke can be processed to reach safe discharge standard
through a filter installed at the end of the kiln. The rotary kiln can fix most
of heavy metal contained in the waste in clinker so that they won't be diffused
again. The residues of the burning waste will be mixed with clinker and produced
cement. Therefore, they won't pollute environment again.