Crusher service time research shoulder heavy

Crusher service time research shoulder heavy

The advent of the is over one century later than roll crusher and 20 years later than the gyratory crusher. Cone Crusher first appeared in 1880, thereafter, it has been widely used around the world. The operation principle of the cone crusher is based on crushing the ore within a half cone of the gap of the two eccentric configuration. Because of the different structure and shape, cone crusher is different from other crushers in crushing and ore separating. But in work principle, cone crusher is similar with .
Due to the long-term harsh work conditions exacerbated the rotor bearing wear out, cone crusher does not work in normal. Moreover, the rotor crusher work is irreplaceable. However, it is also fragile. The replacement is not only expensive, but very difficult, sometimes even resulting in production cut-off.

How to take effective measures to improve the cone crusher rotor bearing life? It is the concern for all of customers in production. We need to pay more attention to its normal conditions: First, choose the right model of the rotor bearing. Besides, the cone crusher bearing force status requires improvement.
Efficient advantage of the cone crusher makes it much better than the common crusher. Regardless of structure or function, cone crusher is always the technology leader in the crushing plant. The following are its main advantages: 1, the structure is novel, unique, simple and reasonable, balanced running, low running costs.
2, Cone crusher machine body are cast steel structure, it sets ribs in the overloaded parts of the high stress points.
3, Cone crusher equipped with roller bearings at both ends of drive shaft. Power-driven is completed by the overloaded bevel. The gear bearing uses skeleton seals to prevent oil leakage.
4, Cone crusher, both within and outside copper sets (ie, inside and outside copper), is fitted with a steel spherical seat and a spherical copper. Dust ring is placed in the spherical seat spring float in the machine running the process play a regulatory role.
5, Cone crusher includes hydraulic adjustment mechanism to facilitate the rapid adjustment of the cone crusher discharge opening size.
6, Hydraulic clear cavity body is the standard configuration of the cone crusher, and completed by a number of clear cavity cylinder placed the body on the floor.
7, Cone crusher adopts spring-loaded over iron release protection.
 Red Star Cone crusher applied with lubrication system includes oil pump, oil box and tube circuit. When oil temperature is over high or the flow rate is too slow, cone crusher will power out automatically. It reduced consumption to a large degree. Increase service time of cone crusher is a task for good, we shall make effort all the time.