2012年(464)
分类:
2012-04-10 16:23:41
ALLJIG - Wet Process (For Coal and Iron Ore beneficiation) – This technology
is based on the separation of minerals in the machines would stratify in
pulsating water. The upward and downward currents fluidize and compact the
grains into relatively homogenous layers. Low density pieces stratify on the
surface, while specifically heavy grains settle on the lower bed. The most
precise stratification of the particles are achieved by the optimization of the
frequency and amplitude of water pulsation according to the feed
characteristics. These machines are air pulsed to achieve nearly wear-free and
so the stroke-motion could be adjusted within wide parameters during operation
with easy operation and control design features. The laterally pulsed jig
guarantees an all time physical stable system with less energy consumption,
maintenance and wear. The distinct advantages of the PLC based analogue measured
discharge control :
This machine is fully automatic with analog measurement
of bed depth with a capacity to handle feed size ranging from 1mm to 150mm with
thorough put rates up to 700TPH.
ALLFLUX (For beneficiation of mineral
fines) – This machine uses fluidized bed technology for the separation and
hydraulic classification of slurried fines for the production of three
classified products. The two-step process permits the handling of slurries
without pre-thickening. The coarse and heavy particles are separated in the
coarse section. The discharge of coarser material out of the central hopper is
automatically controlled by a density probe.
In the peripheral ring, called the fine section, the separation of light particles from the fines and desliming takes place. Particles of a lower specific gravity than the fluidized bed will remain above the fluidized bed and will overflow with most of the process water to the overflow chute. It has the advantage of classifying, separating, thickening and desliming in one step. This machine is fully automatic with no moving parts and can take a feed of size ≤ 4mm with throughput rates of up to 2000cum/hr. ALLAIR - Dry Process (For coal beneficiation only) – This technology is air-pulsed which is best suited for areas where water is scarce and also where customers are particularly interested in keeping water contamination to a minimum. Since it uses no water and processes solely using air, it has a distinct advantage of not adding an undesirable increase in moisture content which is normally associated with wet processes
With its high quality products such as , , , , , Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.