Chinaunix首页 | 论坛 | 博客
  • 博客访问: 209102
  • 博文数量: 124
  • 博客积分: 2970
  • 博客等级: 少校
  • 技术积分: 1240
  • 用 户 组: 普通用户
  • 注册时间: 2012-03-08 10:28
文章分类

全部博文(124)

文章存档

2012年(124)

我的朋友

分类: IT职场

2012-03-29 15:55:52

Introduction of Main Components in Jaw Crusher

Jaw Crusher
is configured for primary and secondary crushing machine of even hardest rock. This series industrial jaw crusher machine can reach the crushing ratio of 4-6 and the shape of final product is even. You can use it as rock crusher or stone crusher. Here you will know the components of jaw crusher in detail.
Jaw Crusher Eccentric Shaft Bearings : These bearings are typically roller in style and usually have labyrinth seals and some are lubricated with an oil bath system.
Jaw Crusher Sides------Cheek Plates : The sides of the jaw crusher are logically called cheeks and they are also covered with high-strength manganese steel plates for durability.
Toggle Plate------Protecting the Jaw Crusher : The bottom of the pitman is supported by a reflex-curved piece of metal called the toggle plate. It serves the purpose of allowing the bottom of the pitman to move up and down with the motion of the eccentric shaft as well as serve as a safety mechanism for the entire jaw. Should a piece of non-crushable material such as a steel loader tooth (sometimes called "tramp iron") enter the jaw and be larger than the closed side setting it can't be crushed nor pass through the jaw. In this case, the toggle plate will crush and prevent further damage.
Tension Rod------Retaining the Toggle Plate : Without the tension rod & spring the bottom of the pitman would just flop around as it isn't connected to the toggle plate, rather just resting against it in the toggle seat. The tension rod system tensions the pitman to the toggle plate as shown in the illustrations.
Jaw Crusher Adjustment: Depending on the disposition of the material being crushed by the jaw different maximum-sized pieces of material may be required. This is achieved by adjusting the opening at the bottom of the Crusher.
Movable Jaw Plate and Fixed Jaw Plate : These two jaw plates move regularly and crush the inputed materials to required fineness.

 
 

With its high quality products such as , , , , , Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.

阅读(1113) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~