Factors limit the capacity of cone crusher

Factors limit the capacity of cone crusher

The crushing capacity of cone crusher, it means the number of material it can crush during the unit time, usually the unit of the crushing capacity is tons/hour The factors that influence the capacity of cone crusher, it can be from these aspects, from the material itself, and the other is from the machines. The hardness of material is one aspect, harder material, it is more difficult to crush, moreover more serious wear and tear on equipment. If the speed of crushing is slow down, the capacity will be of course reduced. Hardness of raw material and crushing capacity is in inverse proportion. For the humidity of the material, if the water content is high, the material is easy to adhere to the inner wall of cone crusher, and also easy to block during the course of material feeding, thus resulting in the capacity reduced. If there is a high requirement on fineness of the crushed production, that requires finer output production, then the crushing capacity will be small. For the composition of the material – if the material contains more fine powder, it will has more influence on crushing effect, because these fine powder is easy to adhere. It is better to screen the material with more fine powder in advance. If the viscosity of material is bigger, it is more likely to adhere. For the parts of crusher (hammer, jaw plate), the greater the wear resistance, the better crushing capacity it has. Usually maintaining these wearing parts, and do replacement of these parts will make it more effective.
Henan Hongxing cone crusher series has a feature of reliable construction, high productivity , easy adjustment and low operating cost. It is widely used both domestic and abroad in metallurgy, architecture, roak making, chemistry and silicate industry for crushing various mid-hard and hard ores and rocks. It's spring release system acts as an overload protection to allow the tramp iron to pass without damage to the crushing chamber. The sealing system uses double dry oil and water sealing to separate the lubricating oil from stone dust to provide its reliable operation .The crushing chamber has standard, medium and short head type to fit the needs of medium crushing , medium-fine crushing and fine crushing.
With its high quality products such as 、、Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.