How to prolong crusher service time

How to prolong crusher service time

The development of crusher industry is quite fast, and there is a vast potential for future development in the heavy industry. At present, the popular and leading crusher in the world mostly develops on the basis of America Newell Corporation. The production and development of crusher are closely linked the scrap steel industry. At the beginning, it only handles the light and thin materials. With the development of recognition about it and the appearance of broken steel’s advantage, various standards’ crusher is developed continuously. The range of application is also more and more extensive. It even can handle the scrapped automobiles and some household appliances.
For increasing the service time of crusher, it is necessary to learn some skills of operational maintenance, so as to accomplish the combination of use and maintenance. There are some methods of maintenance for crusher as follows:
The first is the preparation work before driving.
To check jaw plate, bearings, draw bar, supporting plate, spring and triangle belt are in good condition; fasteners are firm; Protective devices are complete; there is no barrier around the moving parts and so on.
To check the bearings has refueled.
To ensure no materials are in the crushing chamber before opening the crusher.
The start-up sequence is in turn dust collector, crusher, discharging belt conveyor，charging belt conveyor, vibrating feeder and so on.
To adjust the feeding quantity of vibrating feeder, and increase from small materials to big materials, it is usually controlled the height of materials is 4/5 of the jaw chamber height. In addition, it should be also noticed that the largest particle size of materials is no more than 4/5 of the feed opening width. What’s more, when the feed particle size is continuous and uniform, the crusher can brings into play its optimal efficiency.
To check the bearings has refueled.
To ensure no materials are in the crushing chamber before opening the crusher.
The start-up sequence is in turn dust collector, crusher, discharging belt conveyor，charging belt conveyor, vibrating feeder and so on. To adjust the feeding quantity of vibrating feeder, and increase from small materials to big materials, it is usually controlled the height of materials is 4/5 of the jaw chamber height. In addition, it should be also noticed that the largest particle size of materials is no more than 4/5 of the feed opening width. What’s more, when the feed particle size is continuous and uniform, the crusher can brings into play its optimal efficiency
With its high quality products such as 、、、Henan Hongxing mining machinery Co.Ltd has ascended in the front rank of the world in the exporting of mining equipments.