Chinaunix首页 | 论坛 | 博客
  • 博客访问: 27769
  • 博文数量: 22
  • 博客积分: 25
  • 博客等级: 民兵
  • 技术积分: 125
  • 用 户 组: 普通用户
  • 注册时间: 2012-09-24 12:40
文章分类

全部博文(22)

文章存档

2012年(22)

我的朋友
最近访客

分类:

2012-09-24 12:47:24

这一章介绍的nand flash中的ecc检测:
ECC简介
  由于NAND Flash的工艺不能保证NANDMemory Array在其生命周期中保持性能的可靠,因此,在NAND的生产中及使用过程中会产生坏块。为了检测数据的可靠性,在应用NAND Flash的系统中一般都会采用一定的坏区管理策略,而管理坏区的前提是能比较可靠的进行坏区检测。
  如果操作时序和电路稳定性不存在问题的话,NAND Flash出错的时候一般不会造成整个Block或是Page不能读取或是全部出错,而是整个Page(例如512Bytes)中只有一个或几个bit出错。
  对数据的校验常用的有奇偶校验、CRC校验等,而在NAND Flash处理中,一般使用一种比较专用的校验——ECCECC能纠正单比特错误和检测双比特错误,而且计算速度很快,但对1比特以上的错误无法纠正,对2比特以上的错误不保证能检测。
ECC检测原理:
当往NAND Flash的page中写入数据的时候,每256字节我们生成一个ECC校验和,称之为原ECC校验和,保存到PAGE的OOB(out-of-band)数据区中。
  当从NAND Flash中读取数据的时候,每256字节我们生成一个ECC校验和,称之为新ECC校验和。
  校验的时候,根据上述ECC生成原理不难推断:将从OOB区中读出的原ECC校验和新ECC校验和按位异或,若结果为0,则表示不存在错(或是出现了ECC无法检测的错误);若3个字节异或结果中存在11个比特位为1,表示存在一个比特错误,且可纠正;若3个字节异或结果中只存在1个比特位为1,表示OOB区出错;其他情况均表示出现了无法纠正的错误。
下面给出vivi中ecc算法的头文件,按照头文件的说明,这个算法是采用toshiba公司的。因此我们以后在应用中也可直接采用。

/*
 * drivers/mtd/nand_ecc.c
 *
 * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com)
 * Toshiba America Electronics Components, Inc.
 *
 * $Id: nand_ecc.c,v 1.1.1.1 2004/02/04 06:22:25 laputa Exp $
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This file contains an ECC algorithm from Toshiba that detects and
 * corrects 1 bit errors in a 256 byte block of data.
 */


#include <types.h>

/*
 * Pre-calculated 256-way 1 byte column parity
 */

static const u_char nand_ecc_precalc_table[] = {
    0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
    0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
    0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
    0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
    0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
    0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
    0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
    0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
    0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
    0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
    0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
    0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
    0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
    0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
    0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
    0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
};


/*
 * Creates non-inverted ECC code from line parity
 */

static void nand_trans_result(u_char reg2, u_char reg3,
    u_char *ecc_code)
{
    u_char a, b, i, tmp1, tmp2;
    
    /* Initialize variables */
    a = b = 0x80;
    tmp1 = tmp2 = 0;
    
    /* Calculate first ECC byte */
    for (i = 0; i < 4; i++) {
        if (reg3 & a)        /* LP15,13,11,9 --> ecc_code[0] */
            tmp1 |= b;
        b >>= 1;
        if (reg2 & a)        /* LP14,12,10,8 --> ecc_code[0] */
            tmp1 |= b;
        b >>= 1;
        a >>= 1;
    }
    
    /* Calculate second ECC byte */
    b = 0x80;
    for (i = 0; i < 4; i++) {
        if (reg3 & a)        /* LP7,5,3,1 --> ecc_code[1] */
            tmp2 |= b;
        b >>= 1;
        if (reg2 & a)        /* LP6,4,2,0 --> ecc_code[1] */
            tmp2 |= b;
        b >>= 1;
        a >>= 1;
    }
    
    /* Store two of the ECC bytes */
    ecc_code[0] = tmp1;
    ecc_code[1] = tmp2;
}

/*
 * Calculate 3 byte ECC code for 256 byte block
 */

void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
{
    u_char idx, reg1, reg2, reg3;
    int j;
    
    /* Initialize variables */
    reg1 = reg2 = reg3 = 0;
    ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
    
    /* Build up column parity */
    for(j = 0; j < 256; j++) {
        
        /* Get CP0 - CP5 from table */
        idx = nand_ecc_precalc_table[dat[j]];
        reg1 ^= (idx & 0x3f);
        
        /* All bit XOR = 1 ? */
        if (idx & 0x40) {
            reg3 ^= (u_char) j;
            reg2 ^= ~((u_char) j);
        }
    }
    
    /* Create non-inverted ECC code from line parity */
    nand_trans_result(reg2, reg3, ecc_code);
    
    /* Calculate final ECC code */
    ecc_code[0] = ~ecc_code[0];
    ecc_code[1] = ~ecc_code[1];
    ecc_code[2] = ((~reg1) << 2) | 0x03;
}

/*
 * Detect and correct a 1 bit error for 256 byte block
 */

int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
{
    u_char a, b, c, d1, d2, d3, add, bit, i;
    
    /* Do error detection */
    d1 = calc_ecc[0] ^ read_ecc[0];
    d2 = calc_ecc[1] ^ read_ecc[1];
    d3 = calc_ecc[2] ^ read_ecc[2];
    
    if ((d1 | d2 | d3) == 0) {
        /* No errors */
        return 0;
    }
    else {
        a = (d1 ^ (d1 >> 1)) & 0x55;
        b = (d2 ^ (d2 >> 1)) & 0x55;
        c = (d3 ^ (d3 >> 1)) & 0x54;
        
        /* Found and will correct single bit error in the data */
        if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
            c = 0x80;
            add = 0;
            a = 0x80;
            for (i=0; i<4; i++) {
                if (d1 & c)
                    add |= a;
                c >>= 2;
                a >>= 1;
            }
            c = 0x80;
            for (i=0; i<4; i++) {
                if (d2 & c)
                    add |= a;
                c >>= 2;
                a >>= 1;
            }
            bit = 0;
            b = 0x04;
            c = 0x80;
            for (i=0; i<3; i++) {
                if (d3 & c)
                    bit |= b;
                c >>= 2;
                b >>= 1;
            }
            b = 0x01;
            a = dat[add];
            a ^= (b << bit);
            dat[add] = a;
            return 1;
        }
        else {
            i = 0;
            while (d1) {
                if (d1 & 0x01)
                    ++i;
                d1 >>= 1;
            }
            while (d2) {
                if (d2 & 0x01)
                    ++i;
                d2 >>= 1;
            }
            while (d3) {
                if (d3 & 0x01)
                    ++i;
                d3 >>= 1;
            }
            if (i == 1) {
                /* ECC Code Error Correction */
                read_ecc[0] = calc_ecc[0];
                read_ecc[1] = calc_ecc[1];
                read_ecc[2] = calc_ecc[2];
                return 2;
            }
            else {
                /* Uncorrectable Error */
                return -1;
            }
        }
    }
    
    /* Should never happen */
    return -1;
}


阅读(662) | 评论(0) | 转发(0) |
0

上一篇:VIVI中MTD驱动的实现(5)

下一篇:没有了

给主人留下些什么吧!~~