Chinaunix首页 | 论坛 | 博客
  • 博客访问: 5062494
  • 博文数量: 553
  • 博客积分: 13864
  • 博客等级: 上将
  • 技术积分: 11041
  • 用 户 组: 普通用户
  • 注册时间: 2011-11-28 21:25
个人简介

个人Blog: hhktony.com

文章分类

全部博文(553)

文章存档

2015年(1)

2014年(2)

2013年(12)

2012年(384)

2011年(154)

分类: LINUX

2011-12-24 01:55:37

如果你经常使用 Linux 命令行,那么使用 history(历史)命令可以有效地提升你的效率。本文将通过实例的方式向你介绍 history 命令的 15 个用法。

1. 使用 HISTTIMEFORMAT 显示时间戳

    当你从命令行执行 history 命令后,通常只会显示已执行命令的序号和命令本身。如果你想要查看命令历史的时间戳,那么可以执行:

    # export HISTTIMEFORMAT='%F %T '
    # history | more
    3  2012-05-22 09:01:46 lsmod  |chadev
    4  2012-05-22 09:01:46 sudo ./app
    5  2012-05-22 09:01:46 ls
    6  2012-05-22 09:01:46 sudo chmod 777 /dev/akae
    7  2012-05-22 09:01:46 ls
    8  2012-05-22 09:01:46 sudo ./app
    9  2012-05-22 09:01:46 ls

    注意:这个功能只能用在当 HISTTIMEFORMAT 这个环境变量被设置之后,之后的那些新执行的 bash 命令才会被打上正确的时间戳。在此之前的所有命令,都将会显示成设置 HISTTIMEFORMAT 变量的时间.

2. 使用 Ctrl+R 搜索历史

      Ctrl+R 是我经常使用的一个快捷键。此快捷键让你对命令历史进行搜索,对于想要重复执行某个命令的时候非常有用。当找到命令后,通常再按回车键就可以执行该命令。如果想对找到的命令进行调整后再执行,则可以按一下左或右方向键。

    # [Press Ctrl+R from the command prompt, which will display the reverse-i-search prompt]
    (reverse-i-search)`red‘: cat /etc/redhat-release
    [Note: Press enter when you see your command, which will execute the command from the history]
    # cat /etc/redhat-release
    Fedora release 9 (Sulphur)
    
3. 快速重复执行上一条命令

      有 4 种方法可以重复执行上一条命令:
        使用上方向键,并回车执行。
        按 !! 并回车执行。
        输入 !-1 并回车执行。
        按 Ctrl+P 并回车执行。

4. 从命令历史中执行一个指定的命令

    在下面的例子中,如果你想重复执行第 4 条命令,那么可以执行 !4:

    # history | more
    1 service network restart
    2 exit
    3 id
    4 cat /etc/redhat-release
    # !4
    cat /etc/redhat-release
    CentOS release 6.2 (Final)

5. 通过指定关键字来执行以前的命令

    在下面的例子,输入 !ps 并回车,将执行以 ps 打头的命令:

    # !ps
    ps aux | grep yp
    root 16947 0.0 0.1 36516 1264 ? Sl 13:10 0:00 ypbind
    root 17503 0.0 0.0 4124 740 pts/0 S+ 19:19 0:00 grep yp

    
6. 使用 HISTSIZE 控制历史命令记录的总行数

    将下面两行内容追加到 .bash_profile 文件并重新登录 bash shell,命令历史的记录数将变成 450 条:

    # vi ~/.bash_profile
    HISTSIZE=450
    HISTFILESIZE=450

7. 使用 HISTFILE 更改历史文件名称

    默认情况下,命令历史存储在 ~/.bash_history 文件中。添加下列内容到 .bash_profile 文件并重新登录 bash shell,将使用 .commandline_warrior 来存储命令历史:

    # vi ~/.bash_profile
    HISTFILE=/root/.commandline_warrior

    
8. 使用 HISTCONTROL 从命令历史中剔除连续重复的条目

    在下面的例子中,pwd 命令被连续执行了三次。执行 history 后你会看到三条重复的条目。要剔除这些重复的条目,你可以将 HISTCONTROL 设置为 ignoredups:

    # pwd
    # pwd
    # pwd
    # history | tail -4
    44 pwd
    45 pwd
    46 pwd [Note that there are three pwd commands in history, after executing pwd 3 times as shown above]
    47 history | tail -4
    # export HISTCONTROL=ignoredups
    # pwd
    # pwd
    # pwd
    # history | tail -3
    56 export HISTCONTROL=ignoredups
    57 pwd [Note that there is only one pwd command in the history, even after executing pwd 3 times as shown above]
    58 history | tail -4
    
9. 使用 HISTCONTROL 清除整个命令历史中的重复条目

    上例中的 ignoredups 只能剔除连续的重复条目。要清除整个命令历史中的重复条目,可以将 HISTCONTROL 设置成 erasedups:

    # export HISTCONTROL=erasedups
    # pwd
    # service httpd stop
    # history | tail -3
    38 pwd
    39 service httpd stop
    40 history | tail -3
    # ls -ltr
    # service httpd stop
    # history | tail -6
    35 export HISTCONTROL=erasedups
    36 pwd
    37 history | tail -3
    38 ls -ltr
    39 service httpd stop
    [Note that the previous service httpd stop after pwd got erased]
    40 history | tail -6
    
10. 使用 HISTCONTROL 强制 history 不记住特定的命令

    将 HISTCONTROL 设置为 ignorespace,并在不想被记住的命令前面输入一个空格:

    # export HISTCONTROL=ignorespace
    # ls -ltr
    # pwd
    # service httpd stop [Note that there is a space at the beginning of service, to ignore this command from history]
    # history | tail -3
    67 ls -ltr
    68 pwd
    69 history | tail -3
    
11. 使用 -c 选项清除所有的命令历史

    如果你想清除所有的命令历史,可以执行:

    # history -c

12. 命令替换

      在下面的例子里,!!:$ 将为当前的命令获得上一条命令的参数:

    # ls anaconda-ks.cfg
    anaconda-ks.cfg
    # vi !!:$
    vi anaconda-ks.cfg

    补充:使用 !$ 可以达到同样的效果,而且更简单。

    下例中,!^ 从上一条命令获得第一项参数:

    # cp anaconda-ks.cfg anaconda-ks.cfg.bak
    anaconda-ks.cfg
    # vi -5 !^
    vi anaconda-ks.cfg
    
13. 为特定的命令替换指定的参数

    在下面的例子,!cp:2 从命令历史中搜索以 cp 开头的命令,并获取它的第二项参数:

    # cp ~/longname.txt /really/a/very/long/path/long-filename.txt
    # ls -l !cp:2
    ls -l /really/a/very/long/path/long-filename.txt

    下例里,!cp:$ 获取 cp 命令的最后一项参数:

    # ls -l !cp:$
    ls -l /really/a/very/long/path/long-filename.txt
    
14. 使用 HISTSIZE 禁用 history

    如果你想禁用 history,可以将 HISTSIZE 设置为 0:

    # export HISTSIZE=0
    # history
    # [Note that history did not display anything]

    
15. 使用 HISTIGNORE 忽略历史中的特定命令

    下面的例子,将忽略 pwd、ls、ls -ltr 等命令:

    # export HISTIGNORE=”pwd:ls:ls -ltr:”
    # pwd
    # ls
    # ls -ltr
    # service httpd stop
    # history | tail -3
    79 export HISTIGNORE=”pwd:ls:ls -ltr:”
    80 service httpd stop
    81 history
    [Note that history did not record pwd, ls and ls -ltr]

另:bash的设置

运行 set|grep HISTFILE,默认的历史操作记录文件是 .bash_history
在.bash_profile 添加
HISTFILE=/root/test
export   HISTFILE

重新登录,会发现已经把记录写道/root/test 了。

其他设置都写在.bashrc可实现:

# 忽略重复的命令
export HISTCONTROL=ignoredups
# 忽略由冒号分割的这些命令
export HISTIGNORE="[   ]*:&:bg:fg:exit"
# 设置保存历史命令的文件大小
export HISTFILESIZE=1000000000
# 保存历史命令条数
export HISTSIZE=1000000

由于bash的history文件默认是覆盖,如果存在多个终端,最后退出的会覆盖以前历史记录,改为追加形式:
shopt -s histappend

实时写入,而不是退出shell才写入的方法:
PROMPT_COMMAND="history -a; $PROMPT_COMMAND"

阅读(797) | 评论(0) | 转发(0) |
给主人留下些什么吧!~~